Jump to content

"Compilation Of Tutorials, Guides, Tips & Updates"


dcs18

Recommended Posts

8 minutes ago, pamadhilwankalan said:

 sir kantry........i got f**d by replacing ip method with ip range method 5 mins ago.

i put in 184.173.149.184/30, 184.173.188.104/30, 50.22.78.28/30, 50.97.41.96/29, 169.55.0.224/30, 169.55.40.5/28

but idm dialed nicely and fake pop-up started. any suggestion??

I guess Virtual Protect key got installed due to IDM connected to net.

 

Give a try to Reg Trash & see if VP key is there & if there delete it & see.

Link to comment
Share on other sites


  • Replies 7.3k
  • Views 1m
  • Created
  • Last Reply
6 minutes ago, YashKhan said:

I guess Virtual Protect key got installed due to IDM connected to net.

 

Give a try to Reg Trash & see if VP key is there & if there delete it & see.

gone back to my previous ip block method and re-registered IDM. now working nicely. right now, no need to go to http://bit.ly/IDMresetTrial. 

And no need to use Reg Trash

Link to comment
Share on other sites


Just now, pamadhilwankalan said:

gone back to my previous ip block method and re-registered IDM. now working nicely. right now, no need to go to http://bit.ly/IDMresetTrial. 

And no need to use Reg Trash

If VP key got installed then after sometime you will get the fake license popup.

 

Previous IPs block method you mean those 25 IPs block, I am using the same.

Link to comment
Share on other sites


Just now, YashKhan said:

If VP key got installed then after sometime you will get the fake license popup.

 

Previous IPs block method you mean those 25 IPs block, I am using the same.

ya, 25 IPs block method. fake menu do not pop up if it doesn't pop up once after idm exit....and i tried it. possitive results

Link to comment
Share on other sites


On 2/13/2016 at 5:34 PM, kantry123 said:

Well i guess @YashKhan Only few people use KES and out of those FEW people use IDM IP blocking......i'm afraid u might have to figure out yourself....

 

regards

Tried today again blocking 25 IPs IDM with Kaspersky Endpoint Security.

The blocking method for KIS also applies to KES. The only difference is KES doesn't have "All" option under "Protocol" option. I thought may be not checking "Protocol" option means "All" so I left it unchecked.

 

Previous too I have done the same thing. But I guess that time IDM was running & connected to net & installed Virtual Protect key. So VP key was prob then.

 

This time I made sure IDM was not running in the tray. And it worked now.

 

Everything seems fine now.

Link to comment
Share on other sites


I'm creating a task from the Command Line for Dukun Cabul's IDM_reset it seems i cant set "hidden" or "Configure for"

56c286208c1b1_schedidmreset.jpg.2a2c6a4f

so far i have figured out "run with highest Priviledges" and "Run wether user is logged on or not" with "Do Not store password"

this what i have so far and trigger "at logon of any user".

Spoiler

schtasks.exe /Create /tn "IDM_Reset" /sc onlogon /tr "C:\IDM_Reset.bat" /RL HIGHEST /NP

So can "hidden" or "Configure for" in schtasks.exe from Command Prompt?

Link to comment
Share on other sites


  • 2 weeks later...

And IDM is using a new IP now: 185.80.221.18
Add it to your blacklist if you are a fan of OP method.

 

Missed you @dcs18. Come back to your playground, it is too silent without you. 

Link to comment
Share on other sites


knowledge-Spammer
35 minutes ago, J4NY4R said:

And IDM is using a new IP now: 185.80.221.18
Add it to your blacklist if you are a fan of OP method.

 

Missed you @dcs18. Come back to your playground, it is too silent without you. 

i think he may be back soon we hope

Link to comment
Share on other sites


1 hour ago, J4NY4R said:

And IDM is using a new IP now: 185.80.221.18
Add it to your blacklist if you are a fan of OP method.

 

Missed you @dcs18. Come back to your playground, it is too silent without you. 

thanks for the info :D

Link to comment
Share on other sites


7 hours ago, J4NY4R said:

And IDM is using a new IP now: 185.80.221.18

 

¡Great! That new IP do the trick. I was having the pop-up issue too. Now IDM can't check for updates again!

Link to comment
Share on other sites


how many idm ips are blocked now?

Link to comment
Share on other sites


I have add the new ip : 185.80.221.18, clean idm and delete visual 3.5 but i stil get the activation message and idm is not locked to call home, i think there are an other new ip's

Link to comment
Share on other sites


I got the same problem, added new IP, scan registry to find vp3.5, reinstall and reset idm setting but still get fake serial warning.

Link to comment
Share on other sites


6 hours ago, thedeparted said:

I have add the new ip : 185.80.221.18, clean idm and delete visual 3.5 but i stil get the activation message and idm is not locked to call home, i think there are an other new ip's

 

3 hours ago, joehan said:

I got the same problem, added new IP, scan registry to find vp3.5, reinstall and reset idm setting but still get fake serial warning.

Site: https://drive.google.com
Sharecode[?]: /folderview?id=0BztIAKfcU8ruRXhvT0c5YXZlZUU&usp=sharing

 

 

Try this there's an option to do a TRial RESET...Do that and re run  IDM and that should fix the IDM application

 

regards

Link to comment
Share on other sites


9 hours ago, thedeparted said:

I have add the new ip : 185.80.221.18, clean idm and delete visual 3.5 but i stil get the activation message and idm is not locked to call home, i think there are an other new ip's

Are you using 26 IPs block method? I am using it & no prob here. What Firewall?

Link to comment
Share on other sites


1 hour ago, thedeparted said:

 thank you, i give it a try and feedback

ok it seems to be working fine, thank you

 

1 hour ago, YashKhan said:

Are you using 26 IPs block method? I am using it & no prob here. What Firewall?

yes im using it the probleme was the clean and reset

Link to comment
Share on other sites


4 hours ago, kantry123 said:

 

Site: https://drive.google.com
Sharecode[?]: /folderview?id=0BztIAKfcU8ruRXhvT0c5YXZlZUU&usp=sharing

 

 

Try this there's an option to do a TRial RESET...Do that and re run  IDM and that should fix the IDM application

 

regards

It works. although I prefer IP blocking method. Thank you.

Link to comment
Share on other sites


On sábado, 27 de Febrero de 2016 at 9:55 PM, thedeparted said:

I have add the new ip : 185.80.221.18, clean idm and delete visual 3.5 but i stil get the activation message and idm is not locked to call home, i think there are an other new ip's

 

On sábado, 27 de Febrero de 2016 at 0:46 AM, joehan said:

I got the same problem, added new IP, scan registry to find vp3.5, reinstall and reset idm setting but still get fake serial warning.

 

I had blocked the 26 IPs and IDM can't check for updates. So there is not another IP leaking.

Link to comment
Share on other sites


1 hour ago, Dusktilldawn said:

We are missing you dear dcs18

I agree with your comment.

 

to dcs18, no matter what caused your decision to take a vacation from nsane forums your presence in it and your contribution and fun to share with all our nsane members outweigh that decision.

You are encourage to welcome back.

Link to comment
Share on other sites


21 hours ago, vitorio said:

I agree with your comment.

 

to dcs18, no matter what caused your decision to take a vacation from nsane forums your presence in it and your contribution and fun to share with all our nsane members outweigh that decision.

You are encourage to welcome back.

i will be more happy if he doesn't come back here. this is not the place for bully and arrogant people. better he doesn't make his comeback here and lock his horns with others.

Link to comment
Share on other sites


On 6/24/2015 at 5:02 PM, Taker said:

<<snip>>

where is the post??? I am receiving a registration popup for IDM even after blocking 25 ips.

Link to comment
Share on other sites


  • Matrix locked this topic

Archived

This topic is now archived and is closed to further replies.

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...