Sandboxie 4.14

[hfhzuwcp]

Does it work on XP PRO SP3? AFIK XP doesn't support disable driver siging check OR singing driver via dseo

[Terminator]

simply works on every version from windows xp and up ..... so the answer is surly yes

[hfhzuwcp]

Yep it works however there are some issues. On my extremly slow 15 years old PC the activator wasn't able to activete IF sandboxed contol was setted to run at system startup. Activator messes some folders view, there is connection error 3 times if you go to C:\Documents and settings\<username>\mydocuments.

For Windows 7 I prefer manual method ;)

[Terminator]

Yep it works however there are some issues. On my extremly slow 15 years old PC the activator wasn't able to activete IF sandboxed contol was setted to run at system startup. Activator messes some folders view, there is connection error 3 times if you go to C:\Documents and settings\<username>\mydocuments.

For Windows 7 I prefer manual method ;)

I am afraid you are wrong , because , power activator v2.0 has no thing to do with if (sandboxie auto startup or with folders view) .

it does not use any path except that one "C:\Program Files\Sandboxie", well the activation server start from there.

it only replace dll file of sandboxie just on time , and ignites at every boot the activation self-termination service in millisecond at startup . that was all.

may be your old PC does not bear sandboxie's load in the first place.

power activator v2.0 works perfectly on xp-7-8-8.1 (x86 and x64) bit

Greets

[OZOZO]

@Terminator i was so happy to use the new Activator of Nael and thought this version would finally work

but it seems that even this time Sandboxie is not fully cracked. After 3 hours of using Mozilla Firefox

this appears to me. I am using Windows 7 Professional x86/32-Bit

[knowledge-Spammer]

so no fix then no ?

[Schematic]

so no fix then no ?

Of course there is. With dsefix + uuk. I though nael was a ripper, but it seem users are too lazy to follow a method that really works, just because it needs 10 steps.

In power activator it says "No safe mode activation" and I though it was Test mode, lol

[hfhzuwcp]

Absolutly no offence here :) Yes, it's possible. On this old PC everything, every action takes ages.

OZOZO@: I also had this error. I had to activate and deactivate once again. 3rd activation + disable sandboxie control on startup did the trick and finally it's working on XP SP3

Schematic@: power activator is the only one way to have sandboxie newer than 3.68 (if I remember well) activated on XP. For newer system yes, manually method is better

[OZOZO]

Absolutly no offence here :) Yes, it's possible. On this old PC everything, every action takes ages.

OZOZO@: I also had this error. I had to activate and deactivate once again. 3rd activation + disable sandboxie control on startup did the trick and finally it's working on XP SP3

Schematic@: power activator is the only one way to have sandboxie newer than 3.68 (if I remember well) activated on XP. For newer system yes, manually method is better

I will try that and let you know if it works thanks :)

[Schematic]

Absolutly no offence here :) Yes, it's possible. On this old PC everything, every action takes ages.

OZOZO@: I also had this error. I had to activate and deactivate once again. 3rd activation + disable sandboxie control on startup did the trick and finally it's working on XP SP3

Schematic@: power activator is the only one way to have sandboxie newer than 3.68 (if I remember well) activated on XP. For newer system yes, manually method is better

For any x86 system, including latest versions of sandboxie, uuk patch only.

For any x64 system, dsefix.exe + uuk patch.

VirusTotal

dsefix.exe (28/56)

keygen_by_uuk.exe (7/56)

sbiedrvloadfix.bat (0/55)

sbiedrvloadfix.vbs (0/56)

http://www.datafilehost.com/d/d6b667be

password: nsane

Edited the instrutions, removed the credits in txt :( cuz I dont know if its allowed, removed 1 Step that was not necessary.

If after step 8, the sandoxie icon shows a "!", go back to the Task Scheduler, set another delay and reboot.

[OZOZO]

Absolutly no offence here :) Yes, it's possible. On this old PC everything, every action takes ages.

OZOZO@: I also had this error. I had to activate and deactivate once again. 3rd activation + disable sandboxie control on startup did the trick and finally it's working on XP SP3

Schematic@: power activator is the only one way to have sandboxie newer than 3.68 (if I remember well) activated on XP. For newer system yes, manually method is better

It doesnt work properly i try it made a clean install of Sandboxie and disabled sandboxie control on startup but after 3 times of using Mozilla it apears sanboxie must reactivated like in the photo i posted below.

[Blackchildcx]

1. why patch??? justdelete reg key every 30 days...

2. Sandboxy is great in create portable apps and in open keygen, patches in in it.....Maybe to open a sandboxed browser...........

I use SD just when messing around with realy heavy n dangerous system changes ...!

[knight72]

Absolutly no offence here :) Yes, it's possible. On this old PC everything, every action takes ages.

OZOZO@: I also had this error. I had to activate and deactivate once again. 3rd activation + disable sandboxie control on startup did the trick and finally it's working on XP SP3

Schematic@: power activator is the only one way to have sandboxie newer than 3.68 (if I remember well) activated on XP. For newer system yes, manually method is better

For any x86 system, including latest versions of sandboxie, uuk patch only.

For any x64 system, dsefix.exe + uuk patch.

VirusTotal

dsefix.exe (28/56)

keygen_by_uuk.exe (7/56)

sbiedrvloadfix.bat (0/55)

sbiedrvloadfix.vbs (0/56)

http://www.datafilehost.com/d/d6b667be

password: nsane

Edited the instrutions, removed the credits in txt :( cuz I dont know if its allowed, removed 1 Step that was not necessary.

If after step 8, the sandoxie icon shows a "!", go back to the Task Scheduler, set another delay and reboot.

i tried this 2 times doing everything it said to do but just wont work. when i do this Syscode -> Click "..." and paste code i click on the ... on the keygen i get this System Code 0000000000000000 and when i click up by the version number i get this Version unknown. i just give up on that, i will just have to stick with the trial reset. just a pain anyways to do that after every new version comes out.

[hfhzuwcp]

knight72@: You didnt restart or didnt enable test mode for x64.

Schematic@ So x86 does not need to enable test mode? If so and OS doesnt check if driver is signed or not then it's shame I didn't know this earlier...

[knight72]

knight72@: You didnt restart or didnt enable test mode for x64.

Schematic@ So x86 does not need to enable test mode? If so and OS doesnt check if driver is signed or not then it's shame I didn't know this earlier...

i restarted every time it said to and i have 32-bit. maybe there was things left out someone forgot to add.

[Schematic]

@Blackchildcx, removing reg key wont give you the pro feautures of force auto-sandbox nor multi-sandboxes opened at the same time.

@knight72, If its giving System Code 0000000000000000 or Version unknown, most likely its giving this error , if so, go back to Task Scheduler -> SandboxieDrvLoad -> Triggers and set an higher delay then reboot. It all depends how fast your pc is and what other programs you have running in startup.

.

@hfhzuwcp, no its not needed any test mode for x86, just have to run uuk as administrator, patch, reboot, and replace with the values that shows in [...], Ive tested in WinXP, and I think it also works in WinVista/7/8.1, will test later again.

Ive just removed one step that was, running the dsefix.exe as administrator after first reboot, before patching with uuk, but it also works if you dont run it, so I think its not necessary. :unsure:

More info about dsefix http://www.kernelmode.info/forum/viewtopic.php?t=3322&f=11

sbiedrvloadfix.vbs -> This file is optional, it is used to hide the command prompt message, that says something like "Loading cracked sandboxie drivers" :huh: on every login for a few seconds. If dont want use it, set like this:

::Third Tab (Actions)
Click "New..." ->> Browse... ->> C:\Program Files\Sandboxie\sbiedrvloadfix.bat --> OK
Start in: -> C:\Program Files\Sandboxie\

I just have some doubts if this dsefix will pose any vulnerability to sandboxie and or to the whole system, but at least it works perfectly for now. :yes:

Someone make a forensics test :nuke:

[knight72]

@Blackchildcx, removing reg key wont give you the pro feautures of force auto-sandbox nor multi-sandboxes opened at the same time.

@knight72, If its giving System Code 0000000000000000 or Version unknown, most likely its giving this error , if so, go back to Task Scheduler -> SandboxieDrvLoad -> Triggers and set an higher delay then reboot. It all depends how fast your pc is and what other programs you have running in startup.

.

@hfhzuwcp, no its not needed any test mode for x86, just have to run uuk as administrator, patch, reboot, and replace with the values that shows in [...], Ive tested in WinXP, and I think it also works in WinVista/7/8.1, will test later again.

Ive just removed one step that was, running the dsefix.exe as administrator after first reboot, before patching with uuk, but it also works if you dont run it, so I think its not necessary. :unsure:

More info about dsefix http://www.kernelmode.info/forum/viewtopic.php?t=3322&f=11

sbiedrvloadfix.vbs -> This file is optional, it is used to hide the command prompt message, that says something like "Loading cracked sandboxie drivers" :huh: on every login for a few seconds. If dont want use it, set like this:

::Third Tab (Actions)

Click "New..." ->> Browse... ->> C:\Program Files\Sandboxie\sbiedrvloadfix.bat --> OK

Start in: -> C:\Program Files\Sandboxie\

I just have some doubts if this dsefix will pose any vulnerability to sandboxie and or to the whole system, but at least it works perfectly for now. :yes:

Someone make a forensics test :nuke:

i went set the delay to 2 min still getting the same thing. i'm just going to do a system restore to undo everything just use the trial reset when i need to.

[Schematic]

Trial reset wont give you pro feautures :doh: . Set even higher delay, I dont know, maybe your antivirus is blocking something.

What Windows version youre using?

[kimhoover]

Absolutly no offence here :) Yes, it's possible. On this old PC everything, every action takes ages.

OZOZO@: I also had this error. I had to activate and deactivate once again. 3rd activation + disable sandboxie control on startup did the trick and finally it's working on XP SP3

Schematic@: power activator is the only one way to have sandboxie newer than 3.68 (if I remember well) activated on XP. For newer system yes, manually method is better

For any x86 system, including latest versions of sandboxie, uuk patch only.

For any x64 system, dsefix.exe + uuk patch.

VirusTotal

dsefix.exe (28/56)

keygen_by_uuk.exe (7/56)

sbiedrvloadfix.bat (0/55)

sbiedrvloadfix.vbs (0/56)

http://www.datafilehost.com/d/d6b667be

password: nsane

Edited the instrutions, removed the credits in txt :( cuz I dont know if its allowed, removed 1 Step that was not necessary.

If after step 8, the sandoxie icon shows a "!", go back to the Task Scheduler, set another delay and reboot.

i tried this 2 times doing everything it said to do but just wont work. when i do this Syscode -> Click "..." and paste code i click on the ... on the keygen i get this System Code 0000000000000000 and when i click up by the version number i get this Version unknown. i just give up on that, i will just have to stick with the trial reset. just a pain anyways to do that after every new version comes out.

for god sake, don't cry like pussy

1st

run cmd.exe and "C:\Program Files\Sandboxie\License.exe" print syscode

2nd

make sure that sandboxie control startup is disabled and sandboxie control is not running before you click patch

[knight72]

Trial reset wont give you pro feautures :doh: . Set even higher delay, I dont know, maybe your antivirus is blocking something.

What Windows version youre using?

i know trial reset wont give me the pro features why do you think i did all that stuff for lol. i disabled my antivirus the first time still got it and i'm on windows 8.1 32-bit.

[knight72]

Absolutly no offence here :) Yes, it's possible. On this old PC everything, every action takes ages.

OZOZO@: I also had this error. I had to activate and deactivate once again. 3rd activation + disable sandboxie control on startup did the trick and finally it's working on XP SP3

Schematic@: power activator is the only one way to have sandboxie newer than 3.68 (if I remember well) activated on XP. For newer system yes, manually method is better

For any x86 system, including latest versions of sandboxie, uuk patch only.

For any x64 system, dsefix.exe + uuk patch.

VirusTotal

dsefix.exe (28/56)

keygen_by_uuk.exe (7/56)

sbiedrvloadfix.bat (0/55)

sbiedrvloadfix.vbs (0/56)

http://www.datafilehost.com/d/d6b667be

password: nsane

Edited the instrutions, removed the credits in txt :( cuz I dont know if its allowed, removed 1 Step that was not necessary.

If after step 8, the sandoxie icon shows a "!", go back to the Task Scheduler, set another delay and reboot.

i tried this 2 times doing everything it said to do but just wont work. when i do this Syscode -> Click "..." and paste code i click on the ... on the keygen i get this System Code 0000000000000000 and when i click up by the version number i get this Version unknown. i just give up on that, i will just have to stick with the trial reset. just a pain anyways to do that after every new version comes out.

for god sake, don't cry like pussy

1st

run cmd.exe and "C:\Program Files\Sandboxie\License.exe" print syscode

2nd

make sure that sandboxie control startup is disabled and sandboxie control is not running before you click patch

you should be banned for that, not how you treat someone thats having problems. i disabled sandboxie from running at startup after i installed it like it said to do, so nothing was running.

[Schematic]

On x86 systems is way more simple to activate than x64.

@knight72: On x86 you dont have to disable at startup. Try like this: Install Sandboxie -> Reboot -> Exit Sandboxie from system tray -> Go to task manager and click "Show processes from all users" -> Terminate all processes of Sandboxie - > Run UUk as administrator and click patch -> Reboot -> Run UUK again as administrator then click on [...] and paste in fields -> Activate.

Basically just follow step 2, 4, 5, 8 and 9.

If this doesnt work, then I dont know. :(

[kimhoover]

Absolutly no offence here :) Yes, it's possible. On this old PC everything, every action takes ages.

OZOZO@: I also had this error. I had to activate and deactivate once again. 3rd activation + disable sandboxie control on startup did the trick and finally it's working on XP SP3

Schematic@: power activator is the only one way to have sandboxie newer than 3.68 (if I remember well) activated on XP. For newer system yes, manually method is better

For any x86 system, including latest versions of sandboxie, uuk patch only.

For any x64 system, dsefix.exe + uuk patch.

VirusTotal

dsefix.exe (28/56)

keygen_by_uuk.exe (7/56)

sbiedrvloadfix.bat (0/55)

sbiedrvloadfix.vbs (0/56)

http://www.datafilehost.com/d/d6b667be

password: nsane

Edited the instrutions, removed the credits in txt :( cuz I dont know if its allowed, removed 1 Step that was not necessary.

If after step 8, the sandoxie icon shows a "!", go back to the Task Scheduler, set another delay and reboot.

i tried this 2 times doing everything it said to do but just wont work. when i do this Syscode -> Click "..." and paste code i click on the ... on the keygen i get this System Code 0000000000000000 and when i click up by the version number i get this Version unknown. i just give up on that, i will just have to stick with the trial reset. just a pain anyways to do that after every new version comes out.

for god sake, don't cry like pussy

1st

run cmd.exe and "C:\Program Files\Sandboxie\License.exe" print syscode

2nd

make sure that sandboxie control startup is disabled and sandboxie control is not running before you click patch

you should be banned for that, not how you treat someone thats having problems. i disabled sandboxie from running at startup after i installed it like it said to do, so nothing was running.

freedom of speech in my country, pitch!

for x86

1. Install and close sandboxie

2. Use keygen and click Patch

3. Reboot

4. Use keygen and Activate Sandboxie

[knight72]

On x86 systems is way more simple to activate than x64.

@knight72: On x86 you dont have to disable at startup. Try like this: Install Sandboxie -> Reboot -> Exit Sandboxie from system tray -> Go to task manager and click "Show processes from all users" -> Terminate all processes of Sandboxie - > Run UUk as administrator and click patch -> Reboot -> Run UUK again as administrator then click on [...] and paste in fields -> Activate.

Basically just follow step 2, 4, 5, 8 and 9.

If this doesnt work, then I dont know. :(

no luck i give up lol. oh well thanks to both of you for trying.

[Terminator]

@Terminator i was so happy to use the new Activator of Nael and thought this version would finally work

but it seems that even this time Sandboxie is not fully cracked. After 3 hours of using Mozilla Firefox

this appears to me. I am using Windows 7 Professional x86/32-Bit

You just >>>

1- install a clean version of sandboxie

2- activate using power activator v2.0

3- if the message above appears ,, than the error was unsuccessful start of power activator activation server , so just go to your sandboxie folder which is

C:\Program Files\Sandboxie

then right click on the file ( Sandboxie_Power_Activator_server.exe ) and " RUN AS ADMINISTRATOR " .....

4- restart and check the message again .... if it persists than do the fellowing :

- make a bat file and write the following line

@echo off@setlocal enableextensions@cd /d "%~dp0"set nael=%CD%\Sandboxie_Power_Activator_server.exesc create power_activator_service binPath= "%nael%" DisplayName= "sandboxie_power_activator" start= auto

OR simply download the following bat file from

http://www.gulfup.com/?n18Ktw

- Go to your sandboxie folder and paste the file there .

- Run the file you downloaded or you just made as " RUN AS ADMINISTRATOR "....

then restart your PC and your problem will definitely be solved.

hope i helped