Jump to content

[Expired] FlashBoot Pro v3.3m


Recommended Posts



Get the most out of bootable thumbdrives: bootable clones, installable clones and Windows installation to the modern computers.

If you recently bought new computer or replaced a HDD with an SSD, then you need to transfer an operating system with all installed programs, settings, documents, games and browsers to a new PC or new disk. But this is a tedious process which takes a lot of time.

FlashBoot Pro is a tool which can save your time. Create an installable clone of Windows 7/8.x/10 (including all your apps and data) on the USB thumbdrive/HDD and instantly transfer your entire OS to another computer, even with dissimilar hardware: FlashBoot Pro supports driver integration and comes with a large set of prepackaged drivers. In the case of next ransomware virus attack, loss/theft of laptop, hard drive failure or Windows Update failure, you can have a safely-stored copy of your entire OS and all programs, and restore it in no time!

Bootable clones is another FlashBoot Pro feature which enables you to boot Windows 8.1/10 directly from USB storage device on any PC. Have a copy of your computer in your pocket, ready to go under any circumstance. Need your favorite app, document, game, or browser while you’re traveling? Need a second work environment for privacy? Just break out USB thumbdrive with bootable clone of your OS, prepared by FlashBoot Pro!

Also FlashBoot Pro can aid in installation of Windows 7 to new computers, even with NVMe storage devices and USB 3.0 controllers. FlashBoot Pro can prepare Windows Setup on USB thumbdrive with all necessary drivers integrated, and additionally FlashBoot Pro can gain unpartitioned disk space for dual-boot configurations by reinstalling your OEM copy of Windows 10 in-place.


Giveaway link :







The download link for FlashBoot Pro is provided to you above. Download and install FlashBoot Pro. After install, run FlashBoot Pro. Upon launch, a registration dialog should appear. In it, you must click REGISTER this software. Make sure your USB device is already plugged in. Select your USB device when prompted, click OK. A registration page should open in your default browser. On that page, just fill out the form with your name and valid email and confirm. Next, check your email inbox for the confirmation. COPY the registration code that was shown and PASTE it on the registration code dialog in the software. Click OK and NEXT. The wizard will guide you through the next steps in formatting your USB flash drive into a bootable flash drive. That's it! Your registration status will be displayed on title bar. You can also click MORE INFO to display a more detailed status of your registration. Enjoy!


Terms and Conditions
  • This is a 1-device lifetime license, for noncommercial use
  • No free updates; if you update the giveaway, it may become unregistered
  • No free tech support
  • Can't be registered for new devices after promotion is over; can be registered again for the same device after promotion is over (e.g. after Windows reinstallation) by reusing registration code received by e-mail before the end of promotion
  • May not be resold
Technical Details
  • Developed by Prime Expert
  • Version is v3.3m
  • Download size is 67 MB
  • Supports Windows XP, Vista, 7, 8/8.1, 10, and 11 (32-bit and 64-bit)


Giveaway link 2 :



Link to comment
Share on other sites

  • Replies 1
  • Views 590
  • Created
  • Last Reply

Top Posters In This Topic

  • Adenman


Top Posters In This Topic

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...