Nero Platinum 2020 22.0.02300

[LuKeStorm]

On 3/5/2020 at 7:41 PM, yaschir said:

Guys, if you haven't been able to license, I've developed a solution, you can try it.
I recompiled the current activator.

Nero Platinum 2020 Suite v22.0.02300 Activation

SiteURL : https://www.upload.ee

ShareCode : /files/11227096/NRPL2020SACT.zip.html
 

 

It's the same soup with original AdvrCntr6.dll which doesn't working at all.

I have patched the activation for my Nero 2020 Lite v1.3 with the current Nero Burning Rom & Nero Expres version.
The crack can also be used for the suite. I'll see if the other programs still need a cure and then I'll release a proper working crack for the suite.

 

[yaschir]

15 minutes ago, LuKeStorm said:

 

It's the same soup with original AdvrCntr6.dll which doesn't working at all.

I have patched the activation for my Nero 2020 Lite v1.3 with the current Nero Burning Rom & Nero Expres version.
The crack can also be used for the suite. I'll see if the other programs still need a cure and then I'll release a proper working crack for the suite.

 

Crack (dlls are fine, but Serials are missing. Nero needs additional components to work properly, serials are also required for them to work) is correct, but serial numbers are not as they should be. The values written by the serials are wrong.
The reg entries that should be should be this or similar. Did you compile the dlls?
*********************
for x64:

Windows Registry Editor Version 5.00

 

[-HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Nero\Shared\NL11]

 

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Nero\Shared\NL11]
"Serial11_1583425401"="90R6-81AA-MPH0-CAK3-4KH4-WXY4-W751-CLPT"
"Serial11_1583425412"="X017-206A-9865-700U-9ZU2-0XE3-P16E-29WU"
"Serial11_1583425423"="X026-204C-XZXW-7ZW1-1ZCZ-HZT5-4T72-581C"
"Serial11_1583425434"="X027-2070-TKPM-PZ31-M03E-KW26-7974-7MKP"
"Serial11_1583425445"="X028-0083-29A5-AX8W-230U-91AM-HM1K-A3UA"
"Serial11_1583425456"="X029-2051-A7H3-2CWT-098M-31XH-HMAX-3KX1"
"Serial11_1583425467"="X039-0086-9ZA6-XU21-0T72-TC4K-17UA-E9A9"
"Serial11_1583425478"="X050-80CE-40XL-1195-0E76-33K0-2AUU-2TME"

 

[HKEY_CURRENT_USER\Software\Nero\Nero Start\settings]
"FirstTimeStartup"=dword:00000000
"hasUpdate"=dword:00000000
"email"="[email protected]"
"firstRun"=dword:00000000
"subStatus"=dword:00000000
 

*********************

For x86:

Windows Registry Editor Version 5.00

 

[-HKEY_LOCAL_MACHINE\SOFTWARE\Nero\Shared\NL11]

 

[HKEY_LOCAL_MACHINE\SOFTWARE\Nero\Shared\NL11]
"Serial11_1583425401"="90R6-81AA-MPH0-CAK3-4KH4-WXY4-W751-CLPT"
"Serial11_1583425412"="X017-206A-9865-700U-9ZU2-0XE3-P16E-29WU"
"Serial11_1583425423"="X026-204C-XZXW-7ZW1-1ZCZ-HZT5-4T72-581C"
"Serial11_1583425434"="X027-2070-TKPM-PZ31-M03E-KW26-7974-7MKP"
"Serial11_1583425445"="X028-0083-29A5-AX8W-230U-91AM-HM1K-A3UA"
"Serial11_1583425456"="X029-2051-A7H3-2CWT-098M-31XH-HMAX-3KX1"
"Serial11_1583425467"="X039-0086-9ZA6-XU21-0T72-TC4K-17UA-E9A9"
"Serial11_1583425478"="X050-80CE-40XL-1195-0E76-33K0-2AUU-2TME"
 

[HKEY_CURRENT_USER\Software\Nero\Nero Start\settings]
"FirstTimeStartup"=dword:00000000
"hasUpdate"=dword:00000000
"email"="[email protected]"
"firstRun"=dword:00000000
"subStatus"=dword:00000000
 

[LuKeStorm]

Trust me, it is not enough to have the registry entries and key.

And again the dll is the original. Nothing has been changed, you can also check it yourself.

[yaschir]

5 minutes ago, LuKeStorm said:

Trust me, it is not enough to have the registry entries and key.

I can now use Nero and other components. I haven't fully tested Nero Video yet. Nero Video is currently opening without nag, and so are the others. I will see this more clearly when editing a video that takes a long time to edit via Nero Video.

[LuKeStorm]

Then try to burn for example something with Nero Burning Rom. There is a check before the burn/simulation process starts.

[yaschir]

4 minutes ago, LuKeStorm said:

Then try to burn for example something with Nero Burning Rom

I did not burn to CD or DVD, I activated Imaj Recorder and writed it as iso. It works well, I have tested it now.

6 minutes ago, LuKeStorm said:

Then try to burn for example something with Nero Burning Rom

Did you use the recompiled activator by me? Is the result negative on your pc?

[LuKeStorm]

Ok. I tested it again with a clean installation and now it works. I always had nag screen before starting the burning process, strange.

The AdvrCntr6.dll is the original one, but well it works. Interesting to know that it works with key and original dll if you use the bloated original setup of nero.

 

Sorry for the inconvenience

[yaschir]

8 minutes ago, LuKeStorm said:

Ok. I tested it again with a clean installation and now it works. I always had nag screen before starting the burning process, strange.

The AdvrCntr6.dll is the original one, but well it works. Interesting to know that it works with key and original dll if you use the bloated original setup of nero.

 

Sorry for the inconvenience

As I said, the real issue here was serial keys.  I was embedded the license keys I mentioned above on the activator.  😅

[yaschir]

20 minutes ago, LuKeStorm said:

Ok. I tested it again with a clean installation and now it works. I always had nag screen before starting the burning process, strange.

The AdvrCntr6.dll is the original one, but well it works. Interesting to know that it works with key and original dll if you use the bloated original setup of nero.

 

Sorry for the inconvenience

Also, I don't think Nero Prerequisites - Nero Info - Nero AppDummy - Nero KnowHow PLUS and Nero Update software are required. You can also remove them from your system. I removed all this from an installer I prepared for myself. They are not loaded. Without them, Nero works perfectly. If you want friends who want nero installer applications that I designed, I can share them in full.

[LuKeStorm]

Yeah. I don't use the bloated setup of nero, but can I tell you that there's a lot of crap.

Do you notice at the latest when you want to make a "Lite" version like me.

https://www.nsaneforums.com/topic/361468-nero-2020-lite-repack

[yaschir]

3 minutes ago, LuKeStorm said:

Yeah. I don't use the bloated setup of nero, but can I tell you that there's a lot of crap.

You are right. I can also say that I have doubts that these are leaking information to nero (license etc).

[jpp20]

On 3/5/2020 at 3:41 PM, yaschir said:

Guys, if you haven't been able to license, I've developed a solution, you can try it.
I recompiled the current activator.

Nero Platinum 2020 Suite v22.0.02300 Activation

SiteURL : https://www.upload.ee

ShareCode : /files/11227495/NRPL2020SACT.zip.html

 

Hi, yaschir. I did a clean install of Nero, and used the activator that you recompiled. After opening and closing Nero Express a few times, the Non-Licensed Use window appeared. Any solution?

[LuKeStorm]

I think this has to do with the license check by the AdvrCntr6 dll file. (Astron has always patched the check)

I still can't imagine that Nero will work in the long run without a nag screen with just the serial and no patched AdvrCntr6 dll file

[yaschir]

7 minutes ago, J.P said:

 

Hi, yaschir. I did a clean install of Nero, and used the activator that you recompiled. After opening and closing Nero Express a few times, the Non-Licensed Use window appeared. Any solution?

Hello.
Have you applied the alternative method in the archive you have acquired? I presented it as a written text file in this archive.
Regards.

[jpp20]

5 minutes ago, yaschir said:

Hello.
Have you applied the alternative method in the archive you have acquired? I presented it as a written text file in this archive.
Regards.

 

I did exactly as written in the ReadMe.txt file

[yaschir]

8 minutes ago, J.P said:

 

I did exactly as written in the ReadMe.txt file

Have you tried to manually add the written serials given after deleting the existing serials? Are these serials not accepted when you try to add them manually? I hope you have not forgotten to block nero access via the hosts file.

[jpp20]

7 minutes ago, yaschir said:

Have you tried to manually add the written serials given after deleting the existing serials? Are these serials not accepted when you try to add them manually? I hope you have not forgotten to block nero access via the hosts file.

 

First, I run as administrator Nero hosts bloquer.bat and then I run as administrator the activator.

[jpp20]

On 3/5/2020 at 3:41 PM, yaschir said:

Guys, if you haven't been able to license, I've developed a solution, you can try it.
I recompiled the current activator.

Nero Platinum 2020 Suite v22.0.02300 Activation

SiteURL : https://www.upload.ee

ShareCode : /files/11227495/NRPL2020SACT.zip.html

 

I used the serial provided by kabino, without blocking hosts and without activator. The problem that happened with Nero Express did not happen anymore.

[paresh]

No matter what we do the nag screen of "Non License Use Detected" seems impossible to get rid off, at least not with trial & error methods until we get a dedicated patch made by Astron,  DeltaFox or an equally learned person. Thanks to kabino & yaschir for their efforts though.

[jpp20]

28 minutes ago, paresh said:

No matter what we do the nag screen of "Non License Use Detected" seems impossible to get rid off, at least not with trial & error methods until we get a dedicated patch made by Astron,  DeltaFox or an equally learned person. Thanks to kabino & yaschir for their efforts though.

 

The Non-licensed use window didn't appear for me anymore. At least on Nero Express.

[LuKeStorm]

I will release a proper working fix for Nero Platinum 2020 v22.0.02300 in the course of the day.

 

Edit:

Nero Video is causing problems. All other programs are already working, but I'll have to postpone it, sorry.

 

[paresh]

6 hours ago, J.P said:

 

The Non-licensed use window didn't appear for me anymore. At least on Nero Express.

No offense intended buddy, you must be one of the lucky ones but did you try working with Nero Video & Nero Recode? In the entire suite nothing worked for me even after uninstalling the full app with Revo uninstaller & later cleaning the reg entries with the latest version of Auslogics BoostSpeed 11. Thanks.

[jpp20]

6 hours ago, paresh said:

No offense intended buddy, you must be one of the lucky ones but did you try working with Nero Video & Nero Recode? In the entire suite nothing worked for me even after uninstalling the full app with Revo uninstaller & later cleaning the reg entries with the latest version of Auslogics BoostSpeed 11. Thanks.

 

Hi paresh. How are you? I installed Nero Express only.

[jpp20]

On 3/8/2020 at 5:04 AM, LuKeStorm said:

I will release a proper working fix for Nero Platinum 2020 v22.0.02300 in the course of the day.

 

Edit:

Nero Video is causing problems. All other programs are already working, but I'll have to postpone it, sorry.

 

 

Today when I opened Nero Express, the Non-Licensed Use window appeared. It seems that this problem has no solution.

[LuKeStorm]

There is a solution. It can't work with the "Activator", because it does nothing else than installing the serials+launcher settings and the original AdvrCntr6 dll. (Complete nonsense)
In the dll the license check takes place and needs to be patched. It can never work with the original dll, especially not over time.

Patching the license check is no problem, but the check that checks if the dll has been changed. (I'm in the process of finding an effective method to patch the check)

Nero Video is different than all the others. All other programs are already working, as already said.

 

So keep away from those crap Activators (call it whatever) here in the topic.

When Nero Video also works, I will release a fix.