Error0101 Posted May 17, 2017 Share Posted May 17, 2017 18 minutes ago, tomm said: @Error0101 I'm using UEFI. I always format OS partition during Windows Setup process and it never fails. Do you use diskpart or Windows Setup to format your OS partition? I using format tool default in Windows setup progressm like this picture, I choose old OS partition and choose Format 2 minutes ago, rahuldohare said: correct @Error0101 i face same problem when i format my pc. Finally, I found someone has the same situation like me. Hope experts on nsaneforums can help us! Link to comment Share on other sites More sharing options...
trufpal Posted May 17, 2017 Share Posted May 17, 2017 @Error0101 The easiest way is by creating a bootable disk of a Partition software (most partition softwares have this feature) or you can use WinPE if you have one. But if neither of those are possible for your case then try to follow this guide. Bear in mind it's done via cmd so you need to read the guide carefully. Link to comment Share on other sites More sharing options...
Recruit Posted May 17, 2017 Share Posted May 17, 2017 Hello Guys, I do not have these kinds of issues. Anytime after I have bought a notebook / computer....etc....I have converted the disk to GPT and I have installed Windows. First time when you will install Windows you will get 4 partitions : EFI partition system, main partition (C) and other two : Recovery and a partition reserved by M$. For me, the recovery and reserved partitions are usless crap, so I have deleted them and I merged the free spece with the others partitions . So to every of my computers I have this configuration : 1 EFI system partition hidden 1 Main partition ( C ) 1 or more partitions for additional data , usually 1 in my case because I have SSDs Everytime when I need to install a new clean copy of Windows only I have to format the first 2 partitions ( EFI + C ) any other data from the rest remains untouched. Greetings, Link to comment Share on other sites More sharing options...
Error0101 Posted May 17, 2017 Share Posted May 17, 2017 3 hours ago, Recruit said: Hello Guys, I do not have these kinds of issues. Anytime after I have bought a notebook / computer....etc....I have converted the disk to GPT and I have installed Windows. First time when you will install Windows you will get 4 partitions : EFI partition system, main partition (C) and other two : Recovery and a partition reserved by M$. For me, the recovery and reserved partitions are usless crap, so I have deleted them and I merged the free spece with the others partitions . So to every of my computers I have this configuration : 1 EFI system partition hidden 1 Main partition ( C ) 1 or more partitions for additional data , usually 1 in my case because I have SSDs Everytime when I need to install a new clean copy of Windows only I have to format the first 2 partitions ( EFI + C ) any other data from the rest remains untouched. Greetings, I don't know why when I formatting old OS partition (C partition), I get the error that I need convert to GPT disk to continue install, and after that, I need format all of others partition. So I lost all things Link to comment Share on other sites More sharing options...
Recruit Posted May 17, 2017 Share Posted May 17, 2017 10 minutes ago, Error0101 said: I don't know why when I formatting old OS partition (C partition), I get the error that I need convert to GPT disk to continue install, and after that, I need format all of others partition. So I lost all things Yes, try to save all your data before to play with things like MiniTool Partition Wizard Source for the emoticon @dcs18 Link to comment Share on other sites More sharing options...
macnavarra Posted May 17, 2017 Share Posted May 17, 2017 32 minutes ago, Error0101 said: I don't know why when I formatting old OS partition (C partition), I get the error that I need convert to GPT disk to continue install, and after that, I need format all of others partition. So I lost all things Get an HDD less then 2TB or 2TB and you won´t get these message no more. have you tried to reset the UEFI security key before install or turn off UEFI security?. Link to comment Share on other sites More sharing options...
dcs18 Posted May 17, 2017 Share Posted May 17, 2017 12 hours ago, Error0101 said: In my opinion, the worst thing of UEFI is when I reinstall Windows, I need format all partitions on hard drive, not can only format OS partition. 12 hours ago, Error0101 said: It makes me loosing all things on my machine! That is the exact interpretation of the term, clean install — if you did not lose your stuff on a clean UEFI format, your installation failed, isn't it?. 8 hours ago, Error0101 said: Hope experts on nsaneforums can help us! You do not need any additional tools to format to a full, clean, UEFI re-install — just follow this tutorial. Link to comment Share on other sites More sharing options...
Dodel Posted May 17, 2017 Share Posted May 17, 2017 14 hours ago, Error0101 said: Hi, all things I mean in this picture when I format old OS partition to make clean Windows install, If I use UEFI, I need to format all others partition. That makes all of my files gone It's already been said, and the answer is in what you posted, simply convert the HD to GPT and you're done. Link to comment Share on other sites More sharing options...
Error0101 Posted May 18, 2017 Share Posted May 18, 2017 11 hours ago, macnavarra said: Get an HDD less then 2TB or 2TB and you won´t get these message no more. have you tried to reset the UEFI security key before install or turn off UEFI security?. My HDD is less than 2TB, and still receive the message. And I did not try turn UEFI security off. I will. Thanks for your help! 11 hours ago, dcs18 said: That is the exact interpretation of the term, clean install — if you did not lose your stuff on a clean UEFI format, your installation failed, isn't it?. You do not need any additional tools to format to a full, clean, UEFI re-install — just follow this tutorial. I think I make some wrong step before, I will backup all of my important files and try your given tutorial. Thanks for your help 6 hours ago, Dodel said: It's already been said, and the answer is in what you posted, simply convert the HD to GPT and you're done. The problem is when I see the message, I'm in installation process. So I cannot using Partition software to convert it to GPT without loosing my data. If I use CMD to convert to GPT, I will lost my all files (That's not what I want). Anyway, thank you for your reply! Link to comment Share on other sites More sharing options...
Error0101 Posted May 18, 2017 Share Posted May 18, 2017 Hi everyone, If I use another SSD using caddy bay to install Windows on it. And if I get the error like before, I will only lost data on SSD when I format, right? Everything on HDD will remain? Link to comment Share on other sites More sharing options...
debebee Posted May 18, 2017 Share Posted May 18, 2017 Will your windows installer recognize the ssd on caddy @ boot? Unless you are careful, there is a chance you might wipe/erase the wrong drive Link to comment Share on other sites More sharing options...
Error0101 Posted May 18, 2017 Share Posted May 18, 2017 4 hours ago, teodz1984 said: Will your windows installer recognize the ssd on caddy @ boot? Unless you are careful, there is a chance you might wipe/erase the wrong drive Sorry sir, I don't understand what you say. Can you explain more detail? Link to comment Share on other sites More sharing options...
debebee Posted May 18, 2017 Share Posted May 18, 2017 1. can your computer detect the SSD when you mount in the on caddy when you boot it from windows installer media (CD or USB)? 2. if you boot can you identify the both drives? if so be careful choosing the right disk.. choose the wrong disk and you may end up formatting the wrong drive. Link to comment Share on other sites More sharing options...
perlinpinpin Posted May 18, 2017 Share Posted May 18, 2017 To Error0101 : I have done the same (but on a desktop with 1 ssd and 2 hdd). The best way to avoid confusion for Windows installation is, during the installation process, you disconnect the hdd et have only the ssd connected. After windows is installed, you can re-connect your hdd with your precious data. I have always my data (documents, pictures, videos...) on the hdd, and the OS and software on the ssd. So, in case you need re-installation of windows, it's only the ssd and softwares are gonne, but never the data. Link to comment Share on other sites More sharing options...
debebee Posted May 18, 2017 Share Posted May 18, 2017 You have a good point isolating the Hard drive by disconnecting to the system But since his HDD is on a laptop, it would be finicky to remove the ribbon data cable and power cables from the internal drive.. since these are very small if he commits the neophyte error of seating and unseating these drives while the laptop power is on could end up shorting the LAPTOP and or hard disk.. making them large expensive paperweights. In both case it is better to get these done by someone with experience Link to comment Share on other sites More sharing options...
Error0101 Posted May 19, 2017 Share Posted May 19, 2017 17 hours ago, teodz1984 said: 1. can your computer detect the SSD when you mount in the on caddy when you boot it from windows installer media (CD or USB)? 2. if you boot can you identify the both drives? if so be careful choosing the right disk.. choose the wrong disk and you may end up formatting the wrong drive. 1. I think I will move old HDD disk to caddy bay, and new SSD will attach to main laptop hard drive slot 2. I think I will identify these 2 disk by its disk space (its capacity) Anyway, thanks for your reply! 17 hours ago, perlinpinpin said: To Error0101 : I have done the same (but on a desktop with 1 ssd and 2 hdd). The best way to avoid confusion for Windows installation is, during the installation process, you disconnect the hdd et have only the ssd connected. After windows is installed, you can re-connect your hdd with your precious data. I have always my data (documents, pictures, videos...) on the hdd, and the OS and software on the ssd. So, in case you need re-installation of windows, it's only the ssd and softwares are gonne, but never the data. Your recommendation is great. But I'm using laptop as @teodz1984 said, so if I do like your recommendation, it will take me a lot of time (Not like your PC). Anyway, thanks for your reply! Link to comment Share on other sites More sharing options...
Akaneharuka Posted May 19, 2017 Share Posted May 19, 2017 On 2017/5/17 at 9:46 AM, Error0101 said: In my opinion, the worst thing of UEFI is when I reinstall Windows, I need format all partitions on hard drive, not can only format OS partition. It makes me loosing all things on my machine! You only need to change your booth-loader option to legacy boot and you will don:t have that problem anymore Link to comment Share on other sites More sharing options...
Error0101 Posted May 19, 2017 Share Posted May 19, 2017 7 minutes ago, Akaneharuka said: You only need to change your booth-loader option to legacy boot and you will don:t have that problem anymore Can you explain more specific? Thank you for your guide! Link to comment Share on other sites More sharing options...
BioHazard Posted May 19, 2017 Share Posted May 19, 2017 29 minutes ago, Error0101 said: Can you explain more specific? Thank you for your guide! I think what she is saying is go to uefi settings enable legacy boot. Link to comment Share on other sites More sharing options...
Akaneharuka Posted May 19, 2017 Share Posted May 19, 2017 10 hours ago, Error0101 said: Can you explain more specific? Thank you for your guide! Sorry for the late reply. Yes, Like the @BioHazard said above. Enable the legacy boot. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.