vissha Posted March 24, 2017 Share Posted March 24, 2017 @nsan3: After the steps u mentioned in this comment. Did u try rebooting and then updating? If not pls try and report the result ASAP.@ThumperZ1: In that case, we'll need to wait bcoz many reported the same issue and mb admins/staff/mod all collecting logs and diagnostic logs. I hope they'll release a new version build soon to sort this issue completely. Link to comment Share on other sites More sharing options...
ThumperZ1 Posted March 24, 2017 Share Posted March 24, 2017 I've tried all this and even with the latest update files, I'm still stuck at 1394. Link to comment Share on other sites More sharing options...
funkyy Posted March 24, 2017 Share Posted March 24, 2017 8 hours ago, nsan3 said: Will wait and see what @vissha @funkyy @giantslor has to say regarding this. Thanks @nol for the fix by the way. Hello again nsan3. I don't want to contradict the advice of the other guys like vissha etc, because I am sure they all have much more ability and understanding of computer matters than me, but during my week of torture and frustration trying to get MBam v3 installed and updating I tried all the suggestions here on Nsane Down...all the patches, keygens, clean installs, previous builds of v2 and v3 etc etc etc, and it just wouldn't install and work properly. As a last resort I installed the Corporate v.1.80.2.1012 (along with MBam Anti Exploit) and it worked immediately. The only visible difference between the Corporate version and Mbam 3 is that the interface is less elegant...there may be functional differences that the other guys can describe, but I'd rather have a plain looking version that actually works than a nice looking version that doesn't work. It will take something very dramatic to convince me to try to install v3xxx. A bird in the hand is worth two in the bush!!! Link to comment Share on other sites More sharing options...
nsan3 Posted March 25, 2017 Author Share Posted March 25, 2017 7 hours ago, vissha said: @nsan3: After the steps u mentioned in this comment. Did u try rebooting and then updating? If not pls try and report the result ASAP.@ThumperZ1: In that case, we'll need to wait bcoz many reported the same issue and mb admins/staff/mod all collecting logs and diagnostic logs. I hope they'll release a new version build soon to sort this issue completely. Tried rebooting and updating, tried installing older 3.0 versions and updating, nothing works. The update package is stuck at 1394 Link to comment Share on other sites More sharing options...
vissha Posted March 25, 2017 Share Posted March 25, 2017 6 hours ago, funkyy said: I tried all the suggestions here on Nsane Down...all the patches, keygens, clean installs, previous builds of v2 and v3 etc etc etc, and it just wouldn't install and work properly. 1 hour ago, nsan3 said: Tried rebooting and updating, tried installing older 3.0 versions and updating, nothing works. The update package is stuck at 1394 There is a new BETA which fixes the issue and will be released soon. However, there is no other workaround from malwarebytes. Also, pls check this mb forum thread comment. New Beta: Link to comment Share on other sites More sharing options...
knowledge-Spammer Posted March 25, 2017 Share Posted March 25, 2017 nsan3 i retested again this time i host bocked and update and then remove updates and tryed again and still seems fine this my video of test maybe can help make sure yours is set up like this ? as u can see host block not the problems i was thinking it was but its not Link to comment Share on other sites More sharing options...
CR1571 Posted March 26, 2017 Share Posted March 26, 2017 18 hours ago, knowledge said: nsan3 i retested again this time i host bocked and update and then remove updates and tryed again and still seems fine this my video of test maybe can help make sure yours is set up like this ? as u can see host block not the problems i was thinking it was but its not what firewall do you have installed in this video? the one that blocked outgoing data to telemetry.malwarebytes.com thx for sharing Link to comment Share on other sites More sharing options...
knowledge-Spammer Posted March 26, 2017 Share Posted March 26, 2017 21 minutes ago, CR1571 said: what firewall do you have installed in this video? the one that blocked outgoing data to telemetry.malwarebytes.com thx for sharing i use http://www.sphinx-soft.com/Vista/order.html i use plus version but free version will work aswell if u want with fix try this topic but fix is just for Windows 10 Firewall Control 8.1.0.23 not windows-10-firewall-control-82025 Link to comment Share on other sites More sharing options...
Menant Posted March 27, 2017 Share Posted March 27, 2017 Work for me Spoiler what I did was update the free version and copy the files containing them It may be an option until someone fix Close malwarebytes and remove what is marked Spoiler MBAMService.zip Site: https://ufile.io Sharecode[?]: /5e735 C:\ProgramData\Malwarebytes\MBAMService -- config.zip Site: https://ufile.io Sharecode[?]: /8c499 C:\ProgramData\Malwarebytes\MBAMService\config Link to comment Share on other sites More sharing options...
eden2015 Posted March 27, 2017 Share Posted March 27, 2017 I have a solution for the updates friends open hosts file: C:\Windows\System32\drivers\etc delete the line 127.0.0.1 keystone.mwbsys.com or 0.0.0.0 keystone.mwbsys.com now open MalwareBytes, now you see it become free close it add the line again to hosts & save it run patch like you did in the first time then install MalwareBytes thats it!!! updates working! Link to comment Share on other sites More sharing options...
JoseMurzynio Posted March 28, 2017 Share Posted March 28, 2017 thanks for solution works yupi Link to comment Share on other sites More sharing options...
LinkedList Posted March 29, 2017 Share Posted March 29, 2017 On 28/03/2017 at 4:11 AM, eden2015 said: I have a solution for the updates friends open hosts file: C:\Windows\System32\drivers\etc delete the line 127.0.0.1 keystone.mwbsys.com or 0.0.0.0 keystone.mwbsys.com now open MalwareBytes, now you see it become free close it add the line again to hosts & save it run patch like you did in the first time then install MalwareBytes thats it!!! updates working! What's the patch name? Would like to get my updates working again. Thank you Link to comment Share on other sites More sharing options...
eden2015 Posted March 29, 2017 Share Posted March 29, 2017 1 hour ago, LinkedList said: What's the patch name? Would like to get my updates working again. Thank you I have a solution for the updates friends open hosts file: C:\Windows\System32\drivers\etc delete the line 127.0.0.1 keystone.mwbsys.com or 0.0.0.0 keystone.mwbsys.com save it now open MalwareBytes, now you see it become free close it add the line again to hosts & save it run patch like you did in the first time (Start Keygen and click on Pre-Activate) Site: http://www106.zippyshare.com Sharecode[?]: /v/8eMMNir1/file.html then install MalwareBytes v3.x thats it!!! updates working! Link to comment Share on other sites More sharing options...
cool52 Posted March 29, 2017 Share Posted March 29, 2017 4 hours ago, eden2015 said: I have a solution for the updates friends open hosts file: C:\Windows\System32\drivers\etc delete the line 127.0.0.1 keystone.mwbsys.com or 0.0.0.0 keystone.mwbsys.com save it now open MalwareBytes, now you see it become free close it add the line again to hosts & save it run patch like you did in the first time (Start Keygen and click on Pre-Activate) Site: http://www106.zippyshare.com Sharecode[?]: /v/8eMMNir1/file.html then install MalwareBytes v3.x thats it!!! updates working! You are my hero!!!! Thanks a lot! Works great! Link to comment Share on other sites More sharing options...
Skunk1966 Posted March 29, 2017 Share Posted March 29, 2017 5 hours ago, eden2015 said: I have a solution for the updates friends open hosts file: C:\Windows\System32\drivers\etc delete the line 127.0.0.1 keystone.mwbsys.com or 0.0.0.0 keystone.mwbsys.com save it now open MalwareBytes, now you see it become free close it add the line again to hosts & save it run patch like you did in the first time (Start Keygen and click on Pre-Activate) Site: http://www106.zippyshare.com Sharecode[?]: /v/8eMMNir1/file.html then install MalwareBytes v3.x thats it!!! updates working! abcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabcabc I'm having a problem with zippyshare; please upload file to another hosting service Do we have to install Malwarebytes v2 and upgrade to v3 after fixing v2? Link to comment Share on other sites More sharing options...
eden2015 Posted March 29, 2017 Share Posted March 29, 2017 2 hours ago, Skunk1966 said: I'm having a problem with zippyshare; please upload file to another hosting service Do we have to install Malwarebytes v2 and upgrade to v3 after fixing v2? Site: http://www.mirrorcreator.com Sharecode[?]: /files/P2DR7DDA/MalwareBytes_Anti-Malware_Keygen_v1.5_URET.rar_links no you don't need to install v2 Link to comment Share on other sites More sharing options...
sledge101 Posted March 30, 2017 Share Posted March 30, 2017 @eden thats good to know....., mine is no host blocking using license 2.x conf , reused just simple firewall block on windows 10 using 1 ip address. No need to add keystone.mwbsys.com. Direct install from v3.06 , used the 1075 and double checked if it can be updated from 1096 by installing on top of 1075 ( premium activated). Seems fine and applying updates quite well. The update package is 1.0.1626 ( as of 4:28PM , 3/30/2017) The component pckage is: 1.0.96 Version 3.0.6.1469 Link to comment Share on other sites More sharing options...
Chancer Posted March 30, 2017 Share Posted March 30, 2017 58 minutes ago, sledge101 said: @eden thats good to know....., mine is no host blocking using license 2.x conf , reused just simple firewall block on windows 10 using 1 ip address. No need to add keystone.mwbsys.com. Direct install from v3.06 , used the 1075 and double checked if it can be updated from 1096 by installing on top of 1075 ( premium activated). Seems fine and applying updates quite well. The update package is 1.0.1626 ( as of 4:28PM , 3/30/2017) The component pckage is: 1.0.96 Version 3.0.6.1469 Can you explain 'firewall block on windows 10 using 1 ip address' please. I know how to block programs with Firewall - but what IP address are you blocking? Thank you. Link to comment Share on other sites More sharing options...
mikiki Posted March 30, 2017 Share Posted March 30, 2017 There is no need for these shenanigans anymore. They fixed it and updates are working again. Link to comment Share on other sites More sharing options...
sledge101 Posted March 30, 2017 Share Posted March 30, 2017 1 hour ago, Chancer said: Can you explain 'firewall block on windows 10 using 1 ip address' please. I know how to block programs with Firewall - but what IP address are you blocking? Thank you. @chancer ....pm you later. Link to comment Share on other sites More sharing options...
Rainmaker Posted March 30, 2017 Share Posted March 30, 2017 They have changed something, Three win7 boxes I have "healed" themselves without changing anything. Rainmaker Link to comment Share on other sites More sharing options...
Menant Posted March 30, 2017 Share Posted March 30, 2017 I turned on the computer and upgraded myself... I did the procedure only that day without keygen or patch Spoiler Still blocked 0.0.0.0 keystone.mwbsys.com #0.0.0.0 sirius.mwbsys.com 0.0.0.0 bactem.mwbsys.com 0.0.0.0 skipittok.com 0.0.0.0 mwbsys.com 0.0.0.0 telemetry.malwarebytes.com #0.0.0.0 cdn.mwbsys.com #0.0.0.0 data-cdn.mbamupdates.com Link to comment Share on other sites More sharing options...
virge Posted March 31, 2017 Share Posted March 31, 2017 Running MAB 2.2 with "unable to access update server" error message. Link to comment Share on other sites More sharing options...
nsan3 Posted March 31, 2017 Author Share Posted March 31, 2017 11 hours ago, virge said: Running MAB 2.2 with "unable to access update server" error message. Kindly request you to open a new thread for your issue. This thread is for update-errors faced on MBAM v3 thanks, Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.