Sandboxie 4.04

[Roger D]

Can someone please link me to the latest Nael release and install instructions. Thx

Here you go...

http://www.nsaneforums.com/topic/177049-sandboxie-404/?p=620678 :)

Install Instructions:

1) Uninstall sandboxie if you are using any previous version.

2) Exit from 'Test Mode', If you are in 'Test Mode'. and reboot your system.

3) Install Sandboxie 4.04 x86

4) Exit sandboxie from task bar. Open Task Manager and end Sandboxie service.

5) Copy the Patch into Installation folder.

6) Run the Patch with Admin right and click on 'Patch', now delete the Patch. Start sandboxie...

Done!! :showoff:

[xanax]

care to explain how it is not safer because it is in test mode? I got the ukk patch working on win7 32bit and it is running in test mode. Is it possible to have this ukk patch working out of test mode?

No You can not make it work without 'Test Mode'. Simply use Patch by Nael, It's working Patch for X86 without any Test Mode...

http://www.nsaneforums.com/topic/177049-sandboxie-404/?p=620678 :)

this is relative correct, but we can use Driver Signature Enforcement Overrider 1.3b and sign driver (without verified certificate)

after that windows can be started in normal mode, then we start antirookit Win64AST 1.03A, go to Settings and temporarily disable DSE, start Sandboxie Service which will then load driver, then enable DSE again.

Win64AST 1.03A is only for x64 windows

[Ultravires]

I just did a fresh win 7 32bit install and tried using the nael patch and even though it says it is registered it does not seem to work.

This is what i did, after installing SB 4.04 i killed of the SB .exe's in the task manager, i than copied the nael patch to the SB directory than ran the patch as admin and clicked patch.

[cracked by nael]

>>>>>>>>>>>>

Edited September 20, 2013 by cracked by nael

[cracked by nael]

I just did a fresh win 7 32bit install and tried using the nael patch and even though it says it is registered it does not seem to work.

This is what i did, after installing SB 4.04 i killed of the SB .exe's in the task manager, i than copied the nael patch to the SB directory than ran the patch as admin and clicked patch.

simply replace the files with the following attached files.

http://www.hostk.infoshare-code: /upload/download42350.html

[Roger D]

For me patch by Cracked by nael for x86 working just fine on my Windows 8 laptop..

:dance: :dance: :dance:

[Roger D]

New version 4.06 released.. Can you plz update the Patch for the latest release?? :rolleyes:

The Patch for version 4.04 not working for the latest release.. :(

[whatwhat001]

OK after more than a month,

Finally, I found out what cause the patch uuk not working.

Briefly, After Do a fresh install Sandboxie 4.xx whatever, and then apply the UUK patch, everything works.

Then using dseo to turn on Testing mode, ok it works, and then sign the DRIVER,.... here comes the problem parts.

I mean after RESTART PC, some of u guys (including me), has encountered the problem that Sandboxie cannot open and show some error message+code.

And that because the "SANDBOXIE service" cannot be started, and the reason is because earlier we have sign the DRIVER using DSEO already, BUT

Windows 7 x64 has PREVENTED the UNSIGNED DRIVER to be LOADED even you ALREADY signed it with dseo tools.

At first I try to remind myself of what's caused my WINDOWS x64 to STOP the UNSIGNED DRIVER to be loaded (EVEN USING DSEO) tools, finally I figure it out,

some WINDOWS update (but I don't know which one) has PREVENTED UNSIGNED driver to be loaded COMPLETELY. I know most of you guys don't have this problem

but some of you guys including me still have this problem.

In the another words, since after using DSEO and then RESTART PC, windows rejects to load the unsigned driver (that's why SANDBOXIE SERVICE) cannot start,

and then when you try to use UUK patch in order to "ACTIVATE" you can't get the "version" & "syscode".

READ CAREFULLY, you can get "version" & "syscode" via uuk-patch at first after you install sandboxie & BEFORE sign the driver using DSEO tool.

BUT you CANNOT get "version" & "syscode" via uuk-patch AFTER you Signed the driver using DSEO tool & restart PC.

OK now I've tried a lot methods including as following

1)open "cmd" run as administrator

bcdedit /set testsigning onbcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

then restart pc, but for mine, it still doesn't work.

2)

• Hit the Win+R keys together to open the run dialog. Type gpedit.msc to open the local groups policy editor.

• Expand ‘Administrative Templates’ (it’s under ‘User Configuration’). Expand ‘System’. Click ‘Driver Installation’.

• In the right panel, double click on ‘Code Signing for Device Drivers’.

• Choose ‘Enabled’ in the window that appears. In the underlying options, choose ‘Ignore’. This disables drivers signing in Windows 7, and now you can install unsigned drivers in Windows 7.

• Click Apply.Restart your computer to install unsigned drivers.

BUT for mine, it still doesn't work.

3)reboot your pc and while you got your windows is booting up, you have to enter into "Advanced Boot Options", for mine is pressing "F5" followed by pressing "F8"

then choose "Disable Driver Signature Enforcement"

and wait until you can get into your windows normally, and BAM!!! now the Sandboxie service can run, because we DEFINITELY "Disable Driver Signature Enforcement", and now

you can do the same routine --> open uuk-patch, and of course now you can get "version" & "syscode" again, DO NOT FORGET TO CHANGE THE DATE to more than 2013 (as of now).,

and yeah pressing "ACTIVATE" button, and BOOM!!! your Sandboxie got REGISTERED and you can use your SANDBOXIE as FULL PREMIUM once again.

BUT THE problem is you have to enter "Advanced Boot Options" and selecting "Disable Driver Signature Enforcement" everytime you reboot your PC.

OR

you can google "ReadyDriver Plus" software, and it will AUTOMATICALLY --> enter "Advanced Boot Options" and selecting "Disable Driver Signature Enforcement

for you everytime you reboot your windows

OK, in conclusion.

For the most of us, I know that you don't have to do this TEDIOUS task, because you can Normally using UUK-patch and DSEO tool like you used to (and yes I used to be able to do that too up until more than a month ago),

as I guessed that Windows auto Update MUST have to do something to PREVENT my WINDOWS to load unsigned driver even I've already used DSEO tool to bypass the restriction already.

For the some of us (including myself), like I said I've tried to found how to fix the sandboxie in order to work as FULL again, and the 3rd method is doing a great job because other methods do NOT work for me at all.

So if any VIP or any skilled members, cracker, here can help me and some of us who can't using uuk-patch + DSEO tool as in the past, CAN find another way to BEAT the sandboxie protection,

I would really be Appreciate it. Because I do not rather like to boot using "Advanced Boot Options" and selecting "Disable Driver Signature Enforcement" OR even using automatic tool like "ReadyDriver Plus" software

LASTLY, I HOPE I can help some of you who can't using uuk-patch + DSEO method as normal like you used to be able to do like mine. And now you know some other method which I understand myself that is not a best method, but hey it works rather using FREE version of sandboxie.

I'm waiting for a new way, if anyone be able to offer me.

Thank you so much for reading this.!!!

CHEERS!!!

[knowledge-Spammer]

'

Edited January 13, 2017 by knowledge

[Roger D]

have u guys and girls tryed this key

http://pastebin.com/i1DEnZsu

What is this?? :angry:

Name and Password.. :doh: