shanijee Posted February 12, 2008 Share Posted February 12, 2008 i found EmSaExT 1.0.0.1.exe Malicious :dance2: does not work on v630 and a trojan inside itplease anyone explain it Link to comment Share on other sites More sharing options...
KotaXor Posted February 12, 2008 Share Posted February 12, 2008 well...i just actually purchased bit defender internet security 2008 for 3 computer, two years updates definitions and engine for 30 dollars..... it is the first "purchased" software ever for me..... :dance2:haha i remember b4 ever knowing about nod32....i purchased norton antivirus and webroot spysweeper...and mind u i had a slow computer a slow single core processor with 512 mb of ram...and norton hogs ur processor till it dies...and after knowing that norton sucks so much my friend told me about nod32 and never have i wanted to buy security software i wasted my money on norton and webrootMy first AV was norton and boy! was it the biggest mistake I ever made, my pc hanged as and when norton starts updating. Never will I go back to norton again!Hey jofre!Thanks you for your PM, look like there is a lot of negative comment on it. Any comments from you? Link to comment Share on other sites More sharing options...
jofre Posted February 12, 2008 Share Posted February 12, 2008 well...i just actually purchased bit defender internet security 2008 for 3 computer, two years updates definitions and engine for 30 dollars..... it is the first "purchased" software ever for me..... :dance2:haha i remember b4 ever knowing about nod32....i purchased norton antivirus and webroot spysweeper...and mind u i had a slow computer a slow single core processor with 512 mb of ram...and norton hogs ur processor till it dies...and after knowing that norton sucks so much my friend told me about nod32 and never have i wanted to buy security software i wasted my money on norton and webrootMy first AV was norton and boy! was it the biggest mistake I ever made, my pc hanged as and when norton starts updating. Never will I go back to norton again!Hey jofre!Thanks you for your PM, look like there is a lot of negative comment on it. Any comments from you?---------------------------------------------------------------------Hi ,all !About "EmSaExT 1.0.0.1.exe " Patch, mine is working fine (last update : 2867 - 12.Feb.2008 and 3 updates sense yesterday when was installed).How to update :- You must have this patch on your Desktop, then click on it EVERYTIME you wish to see if there is anupdate ( it says " do you want to start patching ?") say "yes", takes less than 1 sec to patch, go to the icon near watchon taskbar, click on it with right-mouse-button and choose "Update". That`s all ! (total time needed 2/3 seconds)No problem found till now !cheersJofre Link to comment Share on other sites More sharing options...
Aeracier Posted February 12, 2008 Share Posted February 12, 2008 Jofre,For my part i've just uninstalled my previous ESS version and Temdono's fix (wich was working very well)Installed the 3.0.630 version (english on one PC and french on another one)killed the node32 serviceapplied once EmSaExT 1.0.0.1.exerelaunch ESSNow it updates automatically since 2 days, and i do nothing. SO i don't click everytime like you say.Why?2 solutions :there is some hidden temdono's fix sequels somewhereyou don't need to click everytimeI ve also noticed that there was zero updates server in the list, and a blank case in the place i had before the option "Choose automatically" or a selected eval server in temdono's patch. Everything is blank.Everything works perfectly@those who find a virus in this patchI did online scans (panda and eset) of the 2 computers where i am testing this new patch, and no viruses found...It looks it is a good patch...time will say Link to comment Share on other sites More sharing options...
maxima2k53 Posted February 12, 2008 Share Posted February 12, 2008 Jofre,For my part i've just uninstalled my previous ESS version and Temdono's fix (wich was working very well)Installed the 3.0.630 version (english on one PC and french on another one)killed the node32 serviceapplied once EmSaExT 1.0.0.1.exerelaunch ESSNow it updates automatically since 2 days, and i do nothing. SO i don't click everytime like you say.Why?2 solutions :there is some hidden temdono's fix sequels somewhereyou don't need to click everytimeI ve also noticed that there was zero updates server in the list, and a blank case in the place i had before the option "Choose automatically" or a selected eval server in temdono's patch. Everything is blank.Everything works perfectly@those who find a virus in this patchI did online scans (panda and eset) of the 2 computers where i am testing this new patch, and no viruses found...It looks it is a good patch...time will sayu know y its supposedly a virus....bc eset found out about it so whenever u manually scan it they want it off ur computer same with temdono fix and same with nodlogin...u guys should know this already even the nsane fix was caught as a virus Link to comment Share on other sites More sharing options...
jofre Posted February 12, 2008 Share Posted February 12, 2008 Jofre,For my part i've just uninstalled my previous ESS version and Temdono's fix (wich was working very well)Installed the 3.0.630 version (english on one PC and french on another one)killed the node32 serviceapplied once EmSaExT 1.0.0.1.exerelaunch ESSNow it updates automatically since 2 days, and i do nothing. SO i don't click everytime like you say.Why?2 solutions :there is some hidden temdono's fix sequels somewhereyou don't need to click everytimeI ve also noticed that there was zero updates server in the list, and a blank case in the place i had before the option "Choose automatically" or a selected eval server in temdono's patch. Everything is blank.Everything works perfectly@those who find a virus in this patchI did online scans (panda and eset) of the 2 computers where i am testing this new patch, and no viruses found...It looks it is a good patch...time will say-------------------------------------------------------------------------------Hi,Aeracier!Glad to see you have done it without any problems !I always do a clean install and those 2/3 sec I said before isn`t a problem. Maybe I didn`t wait for the auto-update time enough and went to update manually too fast...So far so good ...This new version 3.0630 still isn`t on ESET website. But if they haven`t done big changes probably I`ll return to TemDono Fix and v.3.0.621.I have now 3 backups on a different Partition with this new ESET 3.0.630 ( I use Norton Ghost 11.01) :-1). With NodLogin8.0 Final;2). With "avi01 ESET Server Patch 2.1 " ;3). With " EmSaExT_1.0.0.1.Patch "They all are working fine !cheersJofrePS:- Those who requested last new Patch check P.M now : links to download were sent ! Link to comment Share on other sites More sharing options...
maxima2k53 Posted February 12, 2008 Share Posted February 12, 2008 Jofre,For my part i've just uninstalled my previous ESS version and Temdono's fix (wich was working very well)Installed the 3.0.630 version (english on one PC and french on another one)killed the node32 serviceapplied once EmSaExT 1.0.0.1.exerelaunch ESSNow it updates automatically since 2 days, and i do nothing. SO i don't click everytime like you say.Why?2 solutions :there is some hidden temdono's fix sequels somewhereyou don't need to click everytimeI ve also noticed that there was zero updates server in the list, and a blank case in the place i had before the option "Choose automatically" or a selected eval server in temdono's patch. Everything is blank.Everything works perfectly@those who find a virus in this patchI did online scans (panda and eset) of the 2 computers where i am testing this new patch, and no viruses found...It looks it is a good patch...time will say-------------------------------------------------------------------------------Hi,Aeradier!Glad to see you have done it without any problems !I always do a clean install and those 2/3 sec I said before isn`t a problem. Maybe I didn`t wait for the auto-update time enough and went to update manually too fast...So far so good ...This new version 3.0630 still isn`t on ESET website. But if they haven`t done big changes probably I`ll return to TemDono Fix and v.3.0.621.I have now 3 backups on a different Partition with this new ESET 3.0.630 ( I use Norton Ghost 11.01) :-1). With NodLogin8.0 Final;2). With "avi01 ESET Server Patch 2.1 " ;3). With " EmSaExT_1.0.0.1.Patch "They all are working fine !cheersJofrePS:- Those who requested last new Patch check P.M now : links to download were sent ! Link to comment Share on other sites More sharing options...
Aeracier Posted February 12, 2008 Share Posted February 12, 2008 @jofreI totally agree with you and thnx for all the info about nod32 you catch for us ;). Continue the good work :PAlso, those 3 solutions works well, i just don't like "avi01 ESET Server Patch 2.1 " , because it gives me a bad feeling to update from selfmade mirror server, and the facts that sometimes it takes few hours to update. I know it is nothing, when we use a software for free we should shut up, but well we have the choice between few patches, and this one is the one i don't like/choose.@maxima2k53You are absolutly right ;)My main conclusion is that ESET is surely one of the best security solution, and it diserves the money from all users who can pay/afford it. I m gonna buy few licences at work, and keep one for me hihihihihihihihi Link to comment Share on other sites More sharing options...
jofre Posted February 12, 2008 Share Posted February 12, 2008 @jofreI totally agree with you and thnx for all the info about nod32 you catch for us ;). Continue the good work :PAlso, those 3 solutions works well, i just don't like "avi01 ESET Server Patch 2.1 " , because it gives me a bad feeling to update from selfmade mirror server, and the facts that sometimes it takes few hours to update. I know it is nothing, when we use a software for free we should shut up, but well we have the choice between few patches, and this one is the one i don't like/choose.@maxima2k53You are absolutly right ;)My main conclusion is that ESET is surely one of the best security solution, and it diserves the money from all users who can pay/afford it. I m gonna buy few licences at work, and keep one for me hihihihihihihihi--------------------------------------------------------Aeracier :It`s true "avi01 ESET Server Patch 2.1 " sometimes takes too much time to update,but it seems one those 3 servers is faster than the other two.--------------------------------------------------------NEWS !Found another Patch for v.3.0.621 based on TemDono Fix . .Wasn`t tested yet but I´ll do that later and give news then.This is what DASUMO has to say :-I've released a new Fix, based in the same TimeStamp bug that theTemDono FIX, now is more solid and work with any 3.0.621 Eset product,in 32 and 64 bit editions...To install the new fix, use the following steps:1- First, uninstall the TemDono FIX 1.1 before to install the Fix 2050 v2.2- Install the Fix 2050 v2 by Dasumo and wait the automatic reboot.3- After reboot, go to ESET NOD32 or SMART SECURITY and updatethe virus database.Enjoy... Updates up to January 1, 2050.I include a NOD32.LIC valid until 11-08, that enables a MIRRORupdate internal server.----------------------------------------------See you later !cheersJofre Link to comment Share on other sites More sharing options...
Lacius Posted February 12, 2008 Share Posted February 12, 2008 Is there anything that works with NOD32 v.3.0.630.0 similar to the TemDono FIX 1.1, excluding the EmSaExT_1.0.0.1.Patch? Link to comment Share on other sites More sharing options...
jayhuffdaddy Posted February 13, 2008 Share Posted February 13, 2008 why dont you guys just stick with 621 and temdonos. we all know this works. im sure there is nothing to terribly different from that one and the new one. just my $.02 Link to comment Share on other sites More sharing options...
shanijee Posted February 13, 2008 Share Posted February 13, 2008 what about letest 636 anyone have crack for this Link to comment Share on other sites More sharing options...
RobrPatty Posted February 13, 2008 Share Posted February 13, 2008 what about letest 636 anyone have crack for thisNodlogin 8 final works Link to comment Share on other sites More sharing options...
maxima2k53 Posted February 15, 2008 Share Posted February 15, 2008 where did u get the 636 from? y r there new versions coming out so fast...its like 621 came out a couple of weeks ago and i got 630 but 630 hasnt come out on the eset website...and now someone's got a 636...jesus christ...what changes have there been made Link to comment Share on other sites More sharing options...
bewokkomodo Posted February 15, 2008 Share Posted February 15, 2008 excuse me. can anyone tell me how to make the licence valid till 11-08 (Dasumo fix). the files that i got included the Nod32.lic, but i dont know how to make the validation using the .licthanks! Link to comment Share on other sites More sharing options...
maxima2k53 Posted February 15, 2008 Share Posted February 15, 2008 btw i found ess and eav 3.0.636.0...if anybody cares Link to comment Share on other sites More sharing options...
incurable Posted February 15, 2008 Share Posted February 15, 2008 nsane ownzzz, nod32 v2.70.39 with nsane fix and relax guyzzz Link to comment Share on other sites More sharing options...
maxima2k53 Posted February 15, 2008 Share Posted February 15, 2008 nsane ownzzz, nod32 v2.70.39 with nsane fix and relax guyzzzthats already old man get the new version Link to comment Share on other sites More sharing options...
jeroplex Posted February 15, 2008 Share Posted February 15, 2008 theres a new nsane fix for 3.0o? Link to comment Share on other sites More sharing options...
maxima2k53 Posted February 15, 2008 Share Posted February 15, 2008 not for nsane...but the one that ive been using is nodlogin and it works perfectly Link to comment Share on other sites More sharing options...
Quentin Posted February 15, 2008 Share Posted February 15, 2008 what about letest 636 anyone have crack for thisNodlogin 8 final worksDoes it work for nod 3.0 64 bit on vista 64 bit? Link to comment Share on other sites More sharing options...
shanijee Posted February 15, 2008 Share Posted February 15, 2008 theres a new nsane fix for 3.0o?please pm me nsane fix Link to comment Share on other sites More sharing options...
Escobarretje Posted February 15, 2008 Share Posted February 15, 2008 theres a new nsane fix for 3.0o?please pm me nsane fixThere isn't an nsane fix, when it is there it will be posted on the main page! Just read the topic well: he asked a question and your conclusion is that a new fix is out :blink: nodlogin8 final works great here, and I heard that nsane is working together with that guy. Im not sure of it, but just don't ask for the fix to be pmed ;) Link to comment Share on other sites More sharing options...
kaynovak Posted February 15, 2008 Share Posted February 15, 2008 There is just a NSANE fix for NOD32 V2.X not for 3.X. Not public at least.And the NSANE fix you can find here at this site (of course) in the download section. Link to comment Share on other sites More sharing options...
jofre Posted February 15, 2008 Share Posted February 15, 2008 HI, people !I have Dasumo fix 2.0 installed and it never fails ! Automatic updates everyday.Attention :- Just for version 3.0.621 . Maybe more solid than TemDono 1.1, as the man says .If you still don`t have it ,contact me , no problem .---------------------------------------Hi behda ! How are you ?Have a nice Week-End !GreetzJofre Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.