DVDFab 12.0.8.1

[flash13]

DVDFab is all-in-one DVD copying/converting/burning software. In just one or two steps, you can copy any DVD to DVDR/PSP/iPod/etc. DVDFab is brand new, is completely rewritten, is based on more than 6 years of DVD copy software development. It allows you to remove all DVD copy protections, like CSS, CPPM, RC, RCE, APS, UOPs, ARccOS, RipGuard, FluxDVD, CORE X2, etc. It is constantly updated to support latest DVD copy protections and has a very fast copying speed, normally it's about 10 - 20 minutes.

Download

[TheBig]

@French Can CanIs it the correct size for the x64?

 

[French Can Can]

Yes

 

[Pickelback]

Does anyone have a mirror for the offline 64 bit version of 12.0.8.1?  I foolishly updated to 12.0.8.2 and the dvdfabactivator doesn't work with it anymore.

[ARMOUR]

15 minutes ago, Pickelback said:

Does anyone have a mirror for the offline 64 bit version of 12.0.8.1?  I foolishly updated to 12.0.8.2 and the dvdfabactivator doesn't work with it anymore.

https://d217.dvdfab.cn/download/58_12081_2035ad9e/dvdfab12_x64_12081.exe

 

 

[DarkH2O]

On 8/5/2022 at 6:11 PM, French Can Can said:

Yes

 

Is you tool suppose to still work? Last I tried it didnt. 

[French Can Can]

On 8/11/2022 at 3:31 AM, Pickelback said:

Does anyone have a mirror for the offline 64 bit version of 12.0.8.1?  I foolishly updated to 12.0.8.2 and the dvdfabactivator doesn't work with it anymore.

Here you find everything you need for 12.0.8.2 and later versions.
A hug, French.

Spoiler

 

 

Edited August 12, 2022 by French Can Can

[DarkH2O]

On 8/12/2022 at 6:55 AM, French Can Can said:

  Reveal hidden contents

 

 

I tried the install version. On the first try I got all the modules saying trial but then the cracked version message. I did an uninstall and then after all the install I DVDFab cant connect to the internet message even though the internet is working. DVDFab has opened a web page to its site just fine. 

[alexxf]

On 8/10/2022 at 10:31 PM, Pickelback said:

Does anyone have a mirror for the offline 64 bit version of 12.0.8.1?  I foolishly updated to 12.0.8.2 and the dvdfabactivator doesn't work with it anymore.

 

Xanax Activator still is working on latest. Just read  the notes:

 

 

 

Edited August 21, 2022 by alexxf

[DarkH2O]

On 8/12/2022 at 6:55 AM, French Can Can said:

  Reveal hidden contents

 

 

I tried the install version. On the first try I got all the modules saying trial but then the cracked version message. I did an uninstall and then after all the install I DVDFab cant connect to the internet message even though the internet is working. DVDFab has opened a web page to its site just fine. 

*Edit*

Both versions give me the DVDFab cant connect to the internet message. Its not blocked and there is nothing in my host file for dvdfab.

[DarkH2O]

I have even tried DVDFab Xanax Activator with version 12.0.8.1 and did run it as admin. I removed the info from host file and get user name invalid at fab startup.

 

French Can Can your tool only gives me the cant connect to internet error. What am I missing here? Ive used French Can Can tool before version 12.0.7.0 with no issue.

 

Edited August 24, 2022 by DarkH2O

[DarkH2O]

I further tested on another machine and French Can your tool worked fine. Now whats the issue with my main machine? I uninstalled the old dvdfab before trying this several times. I even rebooted just to be sure. Is it not uninstalling cleanly? Any help would be great.

Edited August 24, 2022 by DarkH2O

[French Can Can]

3 hours ago, DarkH2O said:

I tried the install version. On the first try I got all the modules saying trial but then the cracked version message. I did an uninstall and then after all the install I DVDFab cant connect to the internet message even though the internet is working. DVDFab has opened a web page to its site just fine. 

*Edit*

Both versions give me the DVDFab cant connect to the internet message. Its not blocked and there is nothing in my host file for dvdfab.

DVDFab in versions Rev. 7 or Rev. 8 does not have to connect to the Internet, but only open its page which has been successfully installed.
Anyway let me know what version you are using, if 32 or 64 bit and installer or Portable and maybe if we go in private message, explain me better what problem you find and I'll try to help you
See you soon, French.

[DarkH2O]

Ok I finally figured out my issue and it was the same issue I had a while back at this post. It seems powershell and wmic was missing in my environmental location and the activator would fail with errors. The window of the activator switches to successful regardless of this and too fast for me to see it was errors. I fix that and now it works properly. Thanks French.

[French Can Can]

32 minutes ago, DarkH2O said:

I further tested on another machine and French Can your tool worked fine. Now whats the issue with my main machine? I uninstalled the old dvdfab before trying this several times. I even rebooted just to be sure. Is it not uninstalling cleanly? Any help would be great.

I believe that the problem you have on your work PC is due to your Antivirus or Antimalware that does not deactivate correctly BEFORE installing my versions and therefore detect my versions as viruses and therefore, even if silently, block the installations
However, I advise you to use a professional uninstaller, such as: "Revouninstaller Pro" to uninstall the previous DVDFab and always check if the Antivirus is still disabled when you restart your PC because the Defender or other Antivirus activates by themselves when you restart your PC even if you turned them off before.
However it is better that for these your problems we feel in private message here on the forum.

[French Can Can]

13 minutes ago, DarkH2O said:

Ok I finally figured out my issue and it was the same issue I had a while back at this post. It seems powershell and wmic was missing in my environmental location and the activator would fail with errors. The window of the activator switches to successful regardless of this and too fast for me to see it was errors. I fix that and now it works properly. Thanks French.

I'm glad you solved your problem, fine.
However I can assure you that before posting my programs are tested on different PCs and with different configurations and if there are bugs I fix them first.
This is why I always say to read and follow the instructions and the various screens of information that appear when installing or converting programs.
If you like, try the Rev. 8 Portable, both the 32-bit and 64-bit versions can be used simultaneously on the PC and work correctly and in the same way as the installer versions.
If you try them tell me your impressions in a private message. Thanks, French.

[xanax]

about activator, in "Blocker" section should not be used 0.0.0.0 or 127.0.0.1 for hosts entries

1.0.0.0 (Cloudflare) can be used as dummy to pass that connection check at program start

 

[edb]

@xanax, After a while and DVDFab 12.0.82 t.e.m. 12.0.8.6 no longer works with the dummy to pass...

Edited September 15, 2022 by Matt
Removed text formatting.

[alexxf]

3 hours ago, edb said:

@xanax, After a while and DVDFab 12.0.82 t.e.m. 12.0.8.6 no longer works with the dummy to pass...

 

Still working here. See the attachment.  Read the notes . You must edit DVDFab lines in host file.

 

 

 

[edb]

When I use the activator again and change the hosts file again, everything is fine. I have the impression that after a longer time something of the trial period still starts to work... if you install a newer version (update) every 10 days, then that time is too short and you don't have that problem. Even if I set the PC clock forward 2 months and start up DVDFab, and then reset the PC clock correctly, I have the same thing; I then have to use the activator again, but that's okay.

Edited September 15, 2022 by Matt
Removed text formatting after copy and paste.

[alexxf]

3 hours ago, edb said:

When I use the activator again and change the hosts file again, everything is fine. I have the impression that after a longer time something of the trial period still starts to work... if you install a newer version (update) every 10 days, then that time is too short and you don't have that problem. Even if I set the PC clock forward 2 months and start up DVDFab, and then reset the PC clock correctly, I have the same thing; I then have to use the activator again, but that's okay.

 

You can avoid to reapply the activator every time you install a new version just renaming the file: "C:\Users\XXXXXXX\AppData\Roaming\DVDFab\DVDFab12\regRecord\localuse12086.rec" according to the installed DVDFab version. 

 

This way you don't need to edit the host file again.

 

Other way is changing 0.0.0.0 to 1.0.0.0 in the activator itself (only two lines near at the end of the script)

Edited September 15, 2022 by alexxf

[xanax]

2 hours ago, edb said:

Even if I set the PC clock forward 2 months and start up DVDFab, and then reset the PC clock correctly, I have the same thing; I then have to use the activator again, but that's okay.

because of:

%ProgramData%\boost_interprocess\xxxxxxxxxx\yyyyyyyyyyyy

 

do not manipulate with time when you use DVDFab

 

[edb]

I only use DVDFab to remux, i.e. to convert a complete Bluray BD50 to a smaller content in m2ts file. Then I continue with another program. Lately I've been experiencing (now at 12.0.6.8) that after a few days and a few remuxing, DVDFab with the crack of xanax it is no longer possible to continue working with the DVDFab and then get to see the counter, that I only have about an hour left to continue and in the meantime buy the program DVDFab. So currently, with the crack of xanax (and converting 2 times the 0.0.0.0. to 1.0.0.0.) DVDFab works fully, but only a few times within a certain period of time.

 

So now it's actually a full trial...

Edited December 16, 2022 by Matt
Removed text formart.

[zajacz]

On 9/15/2022 at 8:40 AM, alexxf said:

 

You can avoid to reapply the activator every time you install a new version just renaming the file: "C:\Users\XXXXXXX\AppData\Roaming\DVDFab\DVDFab12\regRecord\localuse12086.rec" according to the installed DVDFab version. 

 

This way you don't need to edit the host file again.

 

Other way is changing 0.0.0.0 to 1.0.0.0 in the activator itself (only two lines near at the end of the script)

Alexxf, just a bit confused about renaming the file.  I have the filename "localuse12094.rec" in the described location.  What am I supposed to rename it to?

[alexxf]

34 minutes ago, zajacz said:

Alexxf, just a bit confused about renaming the file.  I have the filename "localuse12094.rec" in the described location.  What am I supposed to rename it to?

 

Ex.: If you install DVDFab v12.0.9.6 rename to localuse12096.rec. Anyway the activator no longer works in latests versions.