T3rM1nat0Rr3 Posted December 27, 2019 Share Posted December 27, 2019 DVDFab is all-in-one DVD copying/converting/burning software. In just one or two steps, you can copy any DVD to DVDR/PSP/iPod/etc. DVDFab is brand new, is completely rewritten, is based on more than 6 years of DVD copy software development. It allows you to remove all DVD copy protections, like CSS, CPPM, RC, RCE, APS, UOPs, ARccOS, RipGuard, FluxDVD, CORE X2, etc. It is constantly updated to support latest DVD copy protections and has a very fast copying speed, normally it's about 10 - 20 minutes. Thanks to Astron for the update. Download Link to comment Share on other sites More sharing options...
nl3141 Posted December 27, 2019 Share Posted December 27, 2019 It is working fine for me so far with the "FrankenFab" method (rename dvdfab64.exe and copy dvdfab64.exe and the loader from 111.0.6.5 over). The new AI enlarging feature for converting videos to mp4/mkv hevc is also present but I haven't been able to actually test it since that feature is currently Nvidia only and I have an AMD GPU. Link to comment Share on other sites More sharing options...
kata40 Posted December 29, 2019 Share Posted December 29, 2019 i tested i enlarge, even if i have 2080 ti, it takes at least 4 hours to make a dvd to bd 5 or bd 9 Link to comment Share on other sites More sharing options...
dexter94 Posted December 29, 2019 Share Posted December 29, 2019 On 12/27/2019 at 4:27 PM, nl3141 said: It is working fine for me so far with the "FrankenFab" method (rename dvdfab64.exe and copy dvdfab64.exe and the loader from 111.0.6.5 over). The new AI enlarging feature for converting videos to mp4/mkv hevc is also present but I haven't been able to actually test it since that feature is currently Nvidia only and I have an AMD GPU. can you upload the files please? Link to comment Share on other sites More sharing options...
DarkH2O Posted January 5, 2020 Share Posted January 5, 2020 On 12/27/2019 at 10:27 AM, nl3141 said: It is working fine for me so far with the "FrankenFab" method (rename dvdfab64.exe and copy dvdfab64.exe and the loader from 111.0.6.5 over). The new AI enlarging feature for converting videos to mp4/mkv hevc is also present but I haven't been able to actually test it since that feature is currently Nvidia only and I have an AMD GPU. You did this the last ChVL version 11065 install files? Link to comment Share on other sites More sharing options...
DarkH2O Posted January 6, 2020 Share Posted January 6, 2020 Has anyone gotten H265 10bit conversion or rip with nvenc to work? It seems to always play back as if the speed was slowed down. Link to comment Share on other sites More sharing options...
kata40 Posted January 6, 2020 Share Posted January 6, 2020 i convert with h 265 10bit... Did you mean playback? After conversion? Link to comment Share on other sites More sharing options...
bigcid10 Posted January 6, 2020 Share Posted January 6, 2020 is there a way to stop it from checking for A.I updates ? it keeps failing the enlarger feature because of that Thank you Link to comment Share on other sites More sharing options...
Lacius Posted January 7, 2020 Share Posted January 7, 2020 3 hours ago, bigcid10 said: is there a way to stop it from checking for A.I updates ? it keeps failing the enlarger feature because of that Thank you Load DVDFab Get everything ready for AI Enlarging Temporarily unblock DVDFab in your firewall Start the AI Enlarging, and it will download After it downloads, you can re-enable the firewall block You only need to do this the first time. As for my results with the AI Enlarging, I can hardly tell the difference between it and the original. Link to comment Share on other sites More sharing options...
bigcid10 Posted January 7, 2020 Share Posted January 7, 2020 16 hours ago, Lacius said: Load DVDFab Get everything ready for AI Enlarging Temporarily unblock DVDFab in your firewall Start the AI Enlarging, and it will download After it downloads, you can re-enable the firewall block You only need to do this the first time. As for my results with the AI Enlarging, I can hardly tell the difference between it and the original. Thank you .worked like a champ take that back,it updated the Ai enlarging app,but would close out saying "success" but no file,I guess it still has issues I play with it some more later Link to comment Share on other sites More sharing options...
kata40 Posted January 8, 2020 Share Posted January 8, 2020 On 1/7/2020 at 4:38 AM, Lacius said: Load DVDFab Get everything ready for AI Enlarging Temporarily unblock DVDFab in your firewall Start the AI Enlarging, and it will download After it downloads, you can re-enable the firewall block You only need to do this the first time. As for my results with the AI Enlarging, I can hardly tell the difference between it and the original. How many hours take to make an dvd? Link to comment Share on other sites More sharing options...
Lacius Posted January 8, 2020 Share Posted January 8, 2020 1 hour ago, kata40 said: How many hours take to make an dvd? I don't remember. Ten maybe? Link to comment Share on other sites More sharing options...
French Can Can Posted January 10, 2020 Share Posted January 10, 2020 DVDFab ver. 11.6x - x86 FULL (By French Can Can) - .exe 11.0.6.5 - Loader 11.0.6.5 - Tested: Version (32 bit): Site: https://www.mirrored.to Sharecode: /files/02R2UGLH/DVDFab_ver._11.6x_-_x86_FULL_(By_French_Can_Can).rar_links DVDFab ver. 11.6x - x64 FULL (By French Can Can) - .exe 11.0.6.5 - Loader 11.0.6.5 - New: Enlarger Al - Tested: Version (64 bit): Site: https://www.mirrored.to Sharecode: /files/VJHEUUCW/DVDFab_ver._11.6x_-_x64_FULL_(By_French_Can_Can)_0.rar_links A special thanks to the good ChVL © who made this possible. Link to comment Share on other sites More sharing options...
DarkH2O Posted January 10, 2020 Share Posted January 10, 2020 On 1/6/2020 at 11:34 AM, kata40 said: i convert with h 265 10bit... Did you mean playback? After conversion? Yes, playback after conversion. Link to comment Share on other sites More sharing options...
KUROKO Posted January 10, 2020 Share Posted January 10, 2020 Is there a portable version 11.0.6.6 (by French Can Can) ? Link to comment Share on other sites More sharing options...
kata40 Posted January 10, 2020 Share Posted January 10, 2020 15 hours ago, DarkH2O said: Yes, playback after conversion. Like, when changing frames or when filming, he moves the camera to the right or left, as if he is a little shaken. maybe the conversion speed with dvdfab is too high, you can not set a lower speed. try Handbrake h265 nvenc, but it doesn't have 10 bits there you can set speed, slow, medium etc On 1/8/2020 at 11:31 PM, Lacius said: I don't remember. Ten maybe? So much? Mine was done in 5 hours and it seemed like a lot to me On 1/7/2020 at 5:04 AM, bigcid10 said: Thank you .worked like a champ take that back,it updated the Ai enlarging app,but would close out saying "success" but no file,I guess it still has issues I play with it some more later When you set the enlarger, you will see a large window that looks like a bluray, but it is bigger than the screen and you can't get it right? Link to comment Share on other sites More sharing options...
Lacius Posted January 10, 2020 Share Posted January 10, 2020 1 hour ago, kata40 said: Like, when changing frames or when filming, he moves the camera to the right or left, as if he is a little shaken. maybe the conversion speed with dvdfab is too high, you can not set a lower speed. try Handbrake h265 nvenc, but it doesn't have 10 bits there you can set speed, slow, medium etc So much? Mine was done in 5 hours and it seemed like a lot to me When you set the enlarger, you will see a large window that looks like a bluray, but it is bigger than the screen and you can't get it right? It's an intensive process, and the time will vary depending on your GPU and the original video duration. I should also point out that 11.0.6.7 beta is recommended when using the Enlarger AI. Still, I don't see much of a difference, and it's not yet worth using in my opinion. Also, the above trick in one of my previous posts to temporarily unblock DVDFab from the internet and download the latest version of the Enlarger AI is recommended, since updating is very important right now. I would attempt to update the Enlarger AI every few days/weeks as improvements are being made. Link to comment Share on other sites More sharing options...
kata40 Posted January 10, 2020 Share Posted January 10, 2020 6 minutes ago, Lacius said: It's an intensive process, and the time will vary depending on your GPU and the original video duration. I should also point out that 11.0.6.7 beta is recommended when using the Enlarger AI. Still, I don't see much of a difference, and it's not yet worth using in my opinion. i made a dvd to bd5 it took about 6 hours i am dissatisfied, that made the image from 4/3 to 16/9 and does not look normal, the image is a little blurred Plus, dvdfab don't have setting for conversion speed It does only at maximum speed and does not turn out so well Instead, Handbrake, with slow, takes the image well, but not at x265 with 10 bits. just x265 simple Link to comment Share on other sites More sharing options...
kata40 Posted January 10, 2020 Share Posted January 10, 2020 13 hours ago, KUROKO said: Is there a portable version 11.0.6.6 (by French Can Can) ? I guess you install the original and then install over the original, which made french can can Link to comment Share on other sites More sharing options...
bigcid10 Posted January 10, 2020 Share Posted January 10, 2020 2 hours ago, kata40 said: Like, when changing frames or when filming, he moves the camera to the right or left, as if he is a little shaken. maybe the conversion speed with dvdfab is too high, you can not set a lower speed. try Handbrake h265 nvenc, but it doesn't have 10 bits there you can set speed, slow, medium etc So much? Mine was done in 5 hours and it seemed like a lot to me When you set the enlarger, you will see a large window that looks like a bluray, but it is bigger than the screen and you can't get it right? no,mine is a nvidia cuda issue ERROR: session run failed with errno :2(Failed to get convolution algorithm. This is probably because cuDNN failed to initialize I'm using cuda 10.2 which is newer than the ones that dvdfab are using I think I'm also using 11.0.6.7 beta as well Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.