Plate tectonics runs deeper than we thought

[Karlston]

Plate tectonics runs deeper than we thought

At 52 years old, plate tectonics has given geologists a whole new level to explore. 

Enlarge / Þingvellir or Thingvellir, is a national park in Southwestern Iceland, about 40km northeast of Iceland's capital, Reykjavík. It's a site of geological significance, as the visuals may indicate.

Ray Wise/Getty Images

It’s right there in the name: “plate tectonics.” Geology’s organizing theory hinges on plates—thin, interlocking pieces of Earth’s rocky skin. Plates’ movements explain earthquakes, volcanoes, mountains, the formation of mineral resources, a habitable climate, and much else. They’re part of the engine that drags carbon from the atmosphere down into Earth’s mantle, preventing a runaway greenhouse climate like Venus. Their recycling through the mantle helps to release heat from Earth’s liquid metal core, making it churn and generate a magnetic field to protect our atmosphere from erosion by the solar wind.

 

The name may not have changed, but today the theory is in the midst of an upgrade to include a deeper level—both in our understanding and in its depth in our planet. “There is a huge transformation,” says Thorsten Becker, the distinguished chair in geophysics at the University of Texas at Austin. “Where we say: ‘plate tectonics’ now, we might mean something that’s entirely different than the 1970s.”

 

Plate Tectonics emerged in the late1960s when geologists realized that plates moving on Earth’s surface at fingernail-growth speeds side-swipe each other at some places (like California) and converge at others (like Japan). When they converge, one plate plunges down into Earth’s mantle under the other plate, but what happened to it deeper in the mantle remained a mystery for most of the 20th century. Like an ancient map labeled “here be dragons,” knowledge of the mantle remained skin-deep except for its major boundaries.

 

Now a marriage of improved computing power and new techniques to investigate Earth’s interior has enabled scientists to address some startling gaps in the original theory, like why there are earthquakes and other tectonic phenomena on continents thousands of miles from plate boundaries:

 

“Plate tectonics as a theory says zero about the continents; [it] says that the plates are rigid and are moving with respect to each other and that the deformation happens only at the boundaries,” Becker told Ars. ”That is nowhere exactly true! It’s [only] approximately true in the oceanic plates.”

 

There are other puzzles, too. Why did the Andes and Tibet wait tens of millions of years after their plates began to converge before they grew tall? And why did the Sea of Japan and the Aegean Sea form rapidly, but only after plates had been plunging under them for tens of millions of years?

 

“They’ve been puzzling us for ages, and they don’t fit well into plate tectonic theory,” says Jonny Wu, a professor focused on tectonics and mantle structure at the University of Houston. “That’s why we’re looking deeper into the mantle to see if this could explain a whole side of tectonics that we don’t really understand.”

The subduction of a tectonic plate.

British Geological Survey

Plate Tectonics meet Slab Tectonics

The Plate Tectonics theory’s modern upgrade is the result of new information. Beginning in the mid-1990s, Earth’s interior has gradually been charted by CAT-Scan-like images, built by mapping the echoes of powerful earthquakes that bounce off features within Earth’s underworld, the way a bat screeches to echo-locate surroundings. These “seismic tomography” pictures show that plates that plunge down from the surface and into the mantle (“subduct” in the language of geologists) don’t just assimilate into a formless blur, as often depicted. In fact, they have a long and eventful afterlife in the mantle.

 

“When I was a PhD student in the early 2000’s, we were still raised with the idea that there is a rapidly convecting upper mantle that doesn’t communicate with the lower mantle,” says Douwe van Hinsbergen, a professor of global plate tectonics at the University of Utrecht. Now, that seismic tomography shows “unequivocal evidence that subducted lithosphere [plate material] goes right down into the lower mantle.” This has settled decades of debate about how deep the heat-driven convection extends through the mantle.

 

van Hinsbergen and his colleagues have mapped many descending plates (dubbed “slabs”), scattered throughout the mantle, oozing and sagging inexorably toward the core-mantle boundary 2,900 kilometers (1,800 miles) below our feet, in an “Atlas of the Underworld.” Some slabs are so old they were tectonic plates on Earth’s surface long before the first dinosaurs evolved.

Moving through the mantle from top to bottom, blue areas are roughly equivalent to subducting slabs. Top panel seismic tomography based on earthquake P (primary) waves, bottom panel seismic tomography based on earthquake S (secondary) waves. Credit: van der Meer et al Tectonophysics 2018, atlas-of-the-underworld.

 

Fluid solid

Slabs sink through the mantle because they are cooler and therefore denser than the surrounding mantle. This works because “the Earth acts as a fluid on very long timescales,” explains Carolina Lithgow-Bertelloni, the endowed chair in geosciences at UCLA.

 

High-pressure, high-temperature diamond-tipped anvil apparatuses can now recreate the conditions of the mantle and even the center of the core, albeit on a tiny scale. They show that rock at mantle pressures and temperatures is fluid but not liquid, solid yet mobile—confounding our intuition like a Salvador Dali painting. Here rigidity is time-dependent: solid crystals flow, and ice is burning hot.

 

But even by the surreal standards of Earth’s underworld, a layer within the mantle between 410 and 660 kilometers (255-410 miles) deep is especially peculiar. Blobs in diamonds that made it back from there to Earth’s surface reveal it to be rich in water, where carbon, that once was life on—or in—the seafloor, waits as carbonate minerals to be recycled into the atmosphere, where diamonds grow fat over eons before, occasionally, being recycled into the crowns of royalty. Earthquake waves are distorted as they pass through it, showing the 660-kilometer-deep boundary has mountainous topography with peaks up to 3 kilometers (2 miles) tall, frosted with a layer of weak matter.

 

Called the “Mantle Transition Zone,” this layer is a natural consequence of the increasing weight of the rock above as you go deeper underground. At certain depths, the pressure forces atoms to huddle tighter together, forming new, more compact minerals. The biggest of these “phase transitions” occurs at a 660-kilometer-deep horizon, where seawater that was trapped in subducting slabs is squeezed out of minerals. The resulting dryer, ultra-dense, and ultra-viscous material sinks down into the lower mantle, moving more than 10 times slower than it did in the upper mantle.

 

For sinking slabs, that’s like a traffic light on a highway (in this analogy your commute takes about 20 million years, one-way), so slabs typically grind to a halt like cars in a traffic jam when they hit the 660-kilometer level. Seismic tomography shows that they stagnate there, sometimes for millions of years. Or, they pile-up, buckle, and concertina. Or, they slide horizontally. Or, sometimes they just pierce the Transition Zone like a spear.

 

It’s these differences in how slabs cross the Mantle Transition Zone that’s the key to explaining those puzzling phenomena on Earth’s continents.

Pulling back the subducted bedsheet

To see how the Andes were affected when a slab crossed the Mantle Transition Zone, Wu’s PhD student Yi-Wei Chen worked with Wu and structural geologist John Suppe, using seismic tomography pictures of the Nazca Slab that’s in the mantle under South America.

 

They clicked the equivalent of an “undo” button to “un-subduct” the slab: “Like a giant bedsheet that’s fallen off the bed, we could slowly pull it back up and just keep pulling and see how big it was,” says Wu. Their technique is borrowed from the way geologists flatten-out contorted crustal rocks in mountain belts and oil fields to understand what the layers were like before they were folded. Using the age of the Pacific Ocean floor, the rate that ocean plates are being manufactured at midocean ridges, and the configuration of those ridges, the team compared the subduction history of South America with a large database of surface geological observations, including the timing of volcanic eruptions.

Enlarge / A slice through Earth’s mantle under the Andes.

Jonny Wu/University of Houston

“Our plate model is just a model, but there is a huge catalog of tectonic signals, especially magmatism, to work with,” says Wu. “We started to see a link between when the slab reached the mid-mantle viscosity change and things that were happening in the surface.”

 

They found that the main uplift of the Andes was delayed by 20–30 million years after the most recent episode of subduction began, a delay that matches the time for the slab to arrive at, stagnate in, and then sink below the Mantle Transition Zone. Delays like that—millions of years between the start of subduction and the start of serious mountain building—have also been recognized in Turkey and Tibet.

 

How can a slab sinking through the Mantle Transition Zone build mountains on an entirely different plate, 660 kilometers away through the mantle?

It’s a mantle wind that blows continents into mountains

“If you take something that’s dense and you make it go down, that’s going to generate flow everywhere, and that is the ‘mantle wind,’ so there’s nothing mysterious about it!” says Lithgow-Bertelloni.

 

Geodynamicists like Lithgow-Bertelloni and Becker use a different approach than Wu’s bedsheet-like un-subduction process. Instead, they code the equations of fluid dynamics into computer models to simulate the flow of high-pressure rock. These models are constrained by the physical conditions in Earth’s mantle gleaned from high-pressure experiments and by the properties of earthquake waves that have traveled through those depths. By playing a “video” of these simulations, scientists can check the behavior of slabs in their models against the “ground truth” of seismic tomographic images. The better they match, the more accurately their models represent how this planet works.

 

“How the geometry evolves has to conform to physics,” says Becker. “The deformation is different in the mantle from the shallow crust because things tend to flow rather than break, as temperatures and pressures are higher.”

 

Their models show that, as slabs sink below the Mantle Transition Zone, they suck mantle down behind them, creating a far-reaching downwelling current of flowing rock. And it’s that down-going gust of mantle wind that drags continental plates above it, like a conveyor belt, compressing them and squeezing mountain belts skyward in places like the Andes, Turkey, and Tibet.

 

The location of the slabs relative to that 660-kilometer horizon determines what kind of mountain chain you get. If a subducting slab hasn’t yet sunk below the 660-kilometer layer, you get the kind of mountains envisaged by classic plate tectonics—without extreme altitudes and confined to a narrow belt above the subducting slab. Examples include the ones around the Western Pacific and Italy: “We think the present-day Apennines are an example of that,” says Becker.

 

The bigger mountain belts east of the Pacific and the Tibetan Plateau are in a different category: “Once the slab transitions through the 660, you induce a much larger scale of convection cell. That’s when we are engaging what we call whole mantle ‘conveyor belts.’ And it’s when you have those global conveyor belts and symmetric downwelling rather than a one-sided downwelling, that’s when you get a lot of the [mountain building],” Becker said.

 

So one slab sinking below the Mantle Transition Zone can create a mantle undertow that squeezes up mountains on an entirely different plate, 660 kilometers above it. This new level of tectonics now makes sense of other geological puzzles.

What’s stressing Asia?

The Tibetan Plateau north of the Himalayas is known as the “Roof of the World” because it stands an average of 4.5 kilometers (15,000 feet) above sea level. It achieved that altitude around 34 million years ago, some 24 million years after the Indian continent began to collide with Asia, and more than 100 million years after seafloor first began to plunge into the mantle under South Asia.

 

“The surface elevation of the Tibetan Plateau was acquired after much of the crustal deformation took place, suggesting that processes in the underlying mantle may have played a key role in the uplift,” van Hinsbergen commented in the journal Science recently.

 

During those 100 million years, the oceanic slab attached to India seems to have stagnated and then penetrated the mantle’s 660-kilometer layer several times before the Indian continent finally collided with Asia. With that collision, continental crust began to plunge into the mantle. But it took millions of years for that continental rock, more buoyant than the oceanic rock that preceded it, to cause a slab pile-up in the Mantle Transition Zone beneath Tibet. India’s slab buckled and broke off, releasing the amputated Indian plate to buoy up the Tibetan Plateau.

Enlarge / Seismic tomographic slice through India and Tibet showing the broken-off Himalaya Slab (Hi) and older Indian slab (In) sinking toward the core.

van Hinsbergen et al Tectonophysics, 2018

The fact that India continues, even today, to bulldoze its way under Asia, long after the continents collided and the slab broke off, has been another puzzle for geologists. It shows that forces beyond classic plate tectonics must be at work.

 

But India’s continued motion isn’t the only mystery of Central Asia. Lake Baikal in Siberia occupies a deep rift in Earth’s crust caused by stresses that pull the crust there apart, and across Central Asia there are San-Andreas-like fault zones responsible for devastating earthquakes. These are out of place for classic plate tectonics since they are thousands of miles from a plate boundary. What, then, is stressing the interior of Asia?

 

The answer is, again, blowing in the mantle wind.

 

“This is not due simply to the fact that India has collided into Asia. This is the result of longstanding subduction in the region. You have compression all through the Japan subduction zone and into Indonesia and India,” says Lithgow-Bertelloni. “There’s been a ring of compression and there’s been downwelling, and that’s what gives you the regional stress pattern today.”

 

In other words, in parts of the world where the mantle wind converges and sinks, it drags plates together forming big mountain chains. Farther away from that convergence, the same mantle flow stretches the overlying plates, causing rifts and faults.

 

Becker and Claudio Faccenna of Roma TRE University linked the downwelling current under East Asia to upwelling of hot mantle rock under Africa, a giant circuit of mantle wind that drives India and Arabia northward today. With Laurent Jolivet of the Sorbonne University, they reason that this mantle wind flows under Asia, stressing those Central Asian faults and rifting the ground under Lake Baikal. They also think it may have stretched East Asia apart to form a series of inland lakes and seas, like the Sea of Japan.

Slab syringe?

Wu thinks those East Asian seas and lakes might instead owe their origin to a different gust of mantle wind: “East Asia is puzzling in that you have these marginal basins that have formed since the Pacific Slab began to subduct under that region. We think the Pacific Slab began to subduct around 50 million years ago and, shortly after that, many of these marginal basins opened up, including the Japan Sea, the Kuril Basin, the Sea of Okhotsk. We don’t really have a good idea why they formed, but the timings overlap.”

 

Japan was part of the Asian mainland until about 23 million years ago, when it rapidly (for geologists) swung away from the mainland like double saloon doors in an old western movie: “These doors swung open very quickly, apparently in less than 2 or 3 million years. The Japan Slab [is] underneath Beijing today, 2,500 kilometers inland. It’s puzzling that it’s so far inland, and it can be followed all the way back to the actual Pacific Slab today,” Wu told me at the AGU conference in Washington, DC, last December. “What we’ve shown at this conference is that slab is most likely all Pacific Slab, and it looks like this slab has to move laterally in the Mantle Transition Zone.”

 

In other words, rather than sinking further down into the mantle, the Pacific Slab seems to have slid sideways in the Mantle Transition Zone, hundreds of kilometers beneath the Asian Plate on the surface. Like a syringe plunger, it must have squeezed mantle material out of its way, and it could be that fugitive flow of mantle that stretched East Asia apart to create the Sea of Japan, the Kuril Basin and the Sea of Okhotsk.

Enlarge / Seismic tomographic picture showing the subducted Pacific Slab (white to purple colors) extending in the Mantle Transition Zone as far as Beijing.

Jonny Wu/University of Houston

Perhaps. Wu is the first to say this is speculative, but it’s an idea that’s consistent with plate reconstructions by other scientists. It also fits the weird, water-rich properties of the Mantle Transition Zone, with weak minerals and pockets of fluid that would lubricate the slab’s penetration sideways rather than downwards. Fluid-dynamic computer models expect a weak lubricating layer at the 660-kilometer horizon. “We see this in the numerical simulations of convection,” says Lithgow-Bertelloni. “You see a lot of horizontal travel because the slab can’t go down because of a combination of things that are going on in terms of the viscosity structure and the phase transitions, and so it gets trapped in the Transition Zone, and so it has to travel.”

 

Becker is more skeptical: “How far the slab under Asia travelled laterally is a very interesting question that a lot of people are thinking about, and it’s one that comes down to what sort of tomographic models you look at,” he says.

Science by upgrade not by uproot

It’s skepticism like Becker’s that drives science forward through a never-ending trial by data. Scientists try to break a theory by throwing observations at it to see if it handles them. New data and new techniques sometimes throw up puzzles that demand upgrades or bugfixes to the theory, but most of the theory tends to remain intact. So it is, and always has been, with plate tectonics. Even though its key ideas crystallized in 1967, it didn’t arrive fully formed in a blinding “eureka!” moment. It was built on discoveries and ideas from more than two dozen scientists over six decades until it explained a range of geological and geophysical observations all over the world. That process continues today.

 

“What has changed dramatically since the late ‘90s is that we’re now approaching understanding of plate tectonics that actually includes the continents!” says Becker.

 

Ironically this new direction harks back to the 1930s: “Arthur Holmes had a textbook in the 1930s where he associated mountain building such as the Andes with mantle convection,” says Becker. When Alfred Wegner proposed that continents drifted, he lacked a mechanism for that. With hindsight it’s strange that few made the link with Holmes’ work: “For some reason science was not ready to make that connection,” says Becker, “and it took until the establishment of seafloor spreading in the late ‘60s for people to make the link.”

The grand challenge ahead

This new, deeper, understanding of plate tectonics is now rippling through the Earth sciences. “Modern tectonics no longer is restricted to classical concepts involving the movements and interactions of thin, rigid tectonic (lithospheric) plates,” says a Grand Challenge report to the US National Science Foundation last year. So Earth scientists need to, “revisit our traditional definition of tectonics as a field.”

 

Ramifications of a new plate tectonics theory extend far beyond geology, too, because it’s woven into the fabric of other sciences, like long-term climate change and the habitability of exoplanets. We’re also realizing that life and climate can affect plate tectonics over long timescales.

 

“Plate tectonics 2.0 is a model of Earth evolution that includes not just oceanic plates but includes the continental plates,” Becker says. “And once you include continental plates then you have to worry about the processes such as sediments coming down from the mountains, lubricating the plate, carbon gets dumped on them, then carbon gets released at the subduction zones. Perhaps you might have control of subduction by climate.”

 

van Hinsbergen puts it this way: “Undoubtedly we’ll have major progress to make in the next decades. But the black box of the dynamics of our planet interior is now starting to be comprehensively constrained by observations, even as deep as to the core-mantle boundary.”

 

So like the plates themselves, it seems plate tectonics as a theory will continue to shift, too.

 

 

Source: Plate tectonics runs deeper than we thought (Ars Technica)