Akaneharuka Posted December 16, 2018 Share Posted December 16, 2018 After I install SSD on my father Laptop after that everytime I starup the laptop it always display error message like this. around 5 second and disapear Link to comment Share on other sites More sharing options...
The AchieVer Posted December 16, 2018 Share Posted December 16, 2018 Was HDD installed on the laptop before? Did you Install windows on the SSD? If yes then ,computer won’t boot from new SSD after upgrading disk from HDD to SSD. Set Windows to Boot from SSD via BIOS If your computer cannot boot after upgrading or replacing system disk from HDD to SSD, the proper reason for this problem is that you may fail to reset the boot order in BIOS. To change the boot mode, you can refer to the following to configure it: 1. Use a SATA cable to connect the SSD to your computer. 2. Restart your PC. Continuously press a specific key (usually F2, F8, F12, Del) to enter BIOS Setup. 3. Then, use the arrow keys to select Boot Option. Here, you can change the boot order to boot from the SSD. Link to comment Share on other sites More sharing options...
hcvn Posted December 16, 2018 Share Posted December 16, 2018 you should enter the BIOS and config boot from HDD fisrt, your computer currently is boot from PCIe realtek as prior. Link to comment Share on other sites More sharing options...
Akaneharuka Posted December 16, 2018 Author Share Posted December 16, 2018 57 minutes ago, hcvn said: you should enter the BIOS and config boot from HDD fisrt, your computer currently is boot from PCIe realtek as prior. Thank you. I already set it to boot from SSD first.But it still load PXE everytimes I restart my computer. Link to comment Share on other sites More sharing options...
hcvn Posted December 16, 2018 Share Posted December 16, 2018 The line IPV4 PXE First is enabled ? Link to comment Share on other sites More sharing options...
The AchieVer Posted December 16, 2018 Share Posted December 16, 2018 Boot into the BIOS and DISABLE boot from network Link to comment Share on other sites More sharing options...
Akaneharuka Posted December 16, 2018 Author Share Posted December 16, 2018 1 hour ago, hcvn said: The line IPV4 PXE First is enabled ? 1 hour ago, The AchieVer said: Boot into the BIOS and DISABLE boot from network Thank you after I disable it. Now that PXE boot page never show again XD btw that option is new ! I show after I install SSD I never see that option before. Link to comment Share on other sites More sharing options...
The AchieVer Posted December 16, 2018 Share Posted December 16, 2018 I am glad the issue has been resolved 🙂 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.