Jordan Posted March 10, 2018 Share Posted March 10, 2018 Topics merged Link to comment Share on other sites More sharing options...
Betts1964 Posted March 10, 2018 Share Posted March 10, 2018 Hi guys, I would like to install this but I am not sure which one to use. Could someone plz point me to the correct one that work? TIA Link to comment Share on other sites More sharing options...
vissha Posted March 10, 2018 Share Posted March 10, 2018 8 minutes ago, bergy1964 said: I would like to install this but I am not sure which one to use. Could someone plz point me to the correct one that work? You can install any build since only the database is changed and not the component/engine version. Just use this: https://downloads.malwarebytes.com/file/mb3/ It'll take you to the current installer. Even if u install any link from above posts/frontpage, it'll be updated to newer database instantly when u update after install. For the fix, I'd suggest you to use old URET fix - still working posted here: Or you could try any other new fixes in any other comments in this thread. Link to comment Share on other sites More sharing options...
Betts1964 Posted March 10, 2018 Share Posted March 10, 2018 Ok, I ran med 1st, installed MBAM it rebooted and it still says trial. Any ideas as to y? thx Link to comment Share on other sites More sharing options...
vissha Posted March 10, 2018 Share Posted March 10, 2018 7 minutes ago, bergy1964 said: Ok, I ran med 1st, installed MBAM it rebooted and it still says trial. Any ideas as to y? thx It works. However, you need to try installing in various ways whichever works. Try this method first: If not, backup settings/take note of custom settings made, clean with good uninstaller incl traces and registry, incl manual search and delete. Then try installing. If that too doesn't work, install old build and activate, then update. Link to comment Share on other sites More sharing options...
Deltafox Posted March 10, 2018 Share Posted March 10, 2018 On 8/3/2018 at 9:21 AM, kalach said: I know that with keygen there are no problems. I decided to test this activator and it turned out to be a fake. I first developed what everyone then copied to activate this soft v3.x... and I also developed a console activator on request for those who wanted to create their own soft installation .. and it works perfectly then before saying it is a fake .. you must know use things .. and it's not up to me to say how .. Regards Link to comment Share on other sites More sharing options...
hacker7 Posted March 10, 2018 Share Posted March 10, 2018 6 minutes ago, Deltafox said: I first developed what everyone then copied to activate this soft... and I also developed a console activator on request for those who wanted to create their own soft installation .. and it works perfectly then before saying it is a fake .. you must know use things .. and it's not up to me to say how .. Regards Unless you also developed this activator Quote Malwarebytes Premium Activator:Site: http://www.mediafire.comSharecode[?]: /file/cd2oraejpfr9ps8/MPA_nsane.rarPassword: nsane @Deltafox you misunderstood @kalach ! He is talking about the guy how posted it , not your keygen. Regards Link to comment Share on other sites More sharing options...
Deltafox Posted March 10, 2018 Share Posted March 10, 2018 1 minute ago, hacker7 said: Unless you also developed this activator @Deltafox you misunderstood @kalach ! He is talking about the guy how posted it , not your keygen. Regards Ok sorry I misunderstood .. I apologize then ... and no... my software carry with me my signature and my name .. for all those who then copy it sometimes even without succeeding .. well problem them .. they did something else .. Regards Link to comment Share on other sites More sharing options...
hacker7 Posted March 10, 2018 Share Posted March 10, 2018 3 minutes ago, Deltafox said: Ok sorry I misunderstood .. I apologize then ... and no... my software carry with me my signature and my name .. for all those who then copy it sometimes even without succeeding .. well problem them .. they did something else .. Regards Yes i know it's not yours! i was just explaining , How ever , if you know who is copying your work then write their name or post their work here, and the word will spread across the web. Regards Link to comment Share on other sites More sharing options...
Deltafox Posted March 10, 2018 Share Posted March 10, 2018 2 minutes ago, hacker7 said: Yes i know it's not yours! i was just explaining , How ever , if you know who is copying your work then write their name or post their work here, and the word will spread across the web. Regards Their problems ... they are not so important as to give them time .. greetings to everyone Link to comment Share on other sites More sharing options...
sofspra Posted March 10, 2018 Share Posted March 10, 2018 3 hours ago, bergy1964 said: Ok, I ran med 1st, installed MBAM it rebooted and it still says trial. Any ideas as to y? thx Ok, for anyone questioning this crack or having difficulty installing, it is likely an operator issue and not the software. I have installed this package on several of my own PCs in the last couple of days. It is really a piece of cake - 1 I do not even bother to delete any prior edition 2 I run the crack 1st which I believe changes the "Host" file. It really matters not what it does 3 I then install the new release 4 This gives me Premium every time. As with all cracks, any good virus program will throw all or part of a crack and this gives failure - 1 I protect the download from my Norton 2 I protect the Extract .Rar file folder from my Norton 3 I protect these same folders from Malwarebyte 4 I protect the Host file from Malwarebytes. I go to C:\Windows\System32\Drivers\Etc. On my W10 I am not seeing the Host file directly so I exclude the folder "etc" to be sure. 5 I watch Norton during the install to be very careful that Norton does not throw out some part of Malwarebytes. So, in summary, this install is 100% for me but I watch my virus program at all times. sofspra Link to comment Share on other sites More sharing options...
Betts1964 Posted March 10, 2018 Share Posted March 10, 2018 45 minutes ago, sofspra said: Ok, for anyone questioning this crack or having difficulty installing, it is likely an operator issue and not the software. I have installed this package on several of my own PCs in the last couple of days. It is really a piece of cake - 1 I do not even bother to delete any prior edition 2 I run the crack 1st which I believe changes the "Host" file. It really matters not what it does 3 I then install the new release 4 This gives me Premium every time. As with all cracks, any good virus program will throw all or part of a crack and this gives failure - 1 I protect the download from my Norton 2 I protect the Extract .Rar file folder from my Norton 3 I protect these same folders from Malwarebyte 4 I protect the Host file from Malwarebytes. I go to C:\Windows\System32\Drivers\Etc. On my W10 I am not seeing the Host file directly so I exclude the folder "etc" to be sure. 5 I watch Norton during the install to be very careful that Norton does not throw out some part of Malwarebytes. So, in summary, this install is 100% for me but I watch my virus program at all times. sofspra Does it ask you to reboot after running the crack? Link to comment Share on other sites More sharing options...
sofspra Posted March 10, 2018 Share Posted March 10, 2018 48 minutes ago, bergy1964 said: Does it ask you to reboot after running the crack? Ok, I doubt the crack really cares much. It seems just to be making a change to the "Host" file. Who knows. once the Host file is changed once, that might be good going forward. For good measure, I run the crack first and select "Pre-Activate". I then run the install of the new edition. For sure, it asks for a re-start after the start of the initial install. After the new start, just wait a little while and the install will continue and you should get an install at Premium status. I then go to Exclusions and exclude the same folders as Norton. For good measure, I also exclude the "Host' folder. This may not be necessary but pretty sure that I have had Malwarebytes want to throw out the Host file and why not. I has been changed for Malwarebytes. This is a good one and I am getting 100% success but I am in control of my Norton. Cheers sofspra Link to comment Share on other sites More sharing options...
Dukun Cabul Posted March 11, 2018 Share Posted March 11, 2018 it's mine ...... that's mine ..... sound familiar to me.... but where.....when..... ahh... I remember now .... I heard that a lot when I was in pre-school playgroup Ok let's get serious now ... I compare these 2 programs, MPA and MalwareBytes_Anti-Malware_Keygen here's the result MPA -------- It writes nothing in registry It creates directory: %ProgramData%\MB2Migration\ It does not reboot/restart the system it does not use serial/key for activation It uses only 1 (one) license file from previous version of Malwarebytes (version 2.x)You guys can find the information about the license which is used to activate your Malwarebytes in "Account Details" section of your Malwarebytes MalwareBytes_Anti-Malware_Keygen ----------------------------------------------------------- It writes some data in registry It creates directory: %ProgramData%\Malwarebytes\ It reboots/restarts the system, otherwise the activation will fail It uses serial/key for activation It uses keygen to generate serials/keys for activation. You guys can find the information about the serial/key which is used to activate your Malwarebytes in "Account Details" section of your Malwarebytes You guys must test those 2 programs to be more understand how it works Link to comment Share on other sites More sharing options...
sofspra Posted March 11, 2018 Share Posted March 11, 2018 51 minutes ago, Brondong said: it's mine ...... that's mine ..... sound familiar to me.... but where.....when..... ahh... I remember now .... I heard that a lot when I was in pre-school playgroup Ok let's get serious now ... I compare these 2 programs, MPA and MalwareBytes_Anti-Malware_Keygen here's the result MPA -------- It writes nothing in registry It creates directory: %ProgramData%\MB2Migration\ It does not reboot/restart the system it does not use serial/key for activation It uses only 1 (one) license file from previous version of Malwarebytes (version 2.x)You guys can find the information about the license which is used to activate your Malwarebytes in "Account Details" section of your Malwarebytes MalwareBytes_Anti-Malware_Keygen ----------------------------------------------------------- It writes some data in registry It creates directory: %ProgramData%\Malwarebytes\ It reboots/restarts the system, otherwise the activation will fail It uses serial/key for activation It uses keygen to generate serials/keys for activation. You guys can find the information about the serial/key which is used to activate your Malwarebytes in "Account Details" section of your Malwarebytes You guys must test those 2 programs to be more understand how it works No serial/key when I use this program. sofspra Link to comment Share on other sites More sharing options...
boulawan Posted March 20, 2018 Share Posted March 20, 2018 Malwarebytes prime 3.4.4.2398 (19 Mars, 2018) https://data-cdn.mbamupdates.com/web/mb3-setup-consumer/mb3-setup-consumer-3.4.4.2398-1.0.322-1.0.4406.exe Link to comment Share on other sites More sharing options...
Betts1964 Posted March 30, 2018 Share Posted March 30, 2018 which one of these actually works...plz insert link that does...thx Link to comment Share on other sites More sharing options...
sofspra Posted March 30, 2018 Share Posted March 30, 2018 36 minutes ago, bergy1964 said: which one of these actually works...plz insert link that does...thx Why not just go to malwarebytes.com and download the latest V3.4.5.2467. I just installed over the prior Edition and did not lose activation. If I do, I will apply the crack. My prior edition was cracked. sofspra Link to comment Share on other sites More sharing options...
Betts1964 Posted March 30, 2018 Share Posted March 30, 2018 what will activate it? thx Link to comment Share on other sites More sharing options...
sofspra Posted March 30, 2018 Share Posted March 30, 2018 19 minutes ago, bergy1964 said: what will activate it? thx Ok, here is my link on Mediafire. This is the link for 3..4.4. and includes the crack. If this works for you, then you might be best to install 4.4.4 first. I just installed 3.4.5 a few minutes ago. It kept all settings and all and no question on activation so far. I have the crack in a separate folder but it is an extracted file so not sure if the crack is just one file or uses other files too. Let me know how you make out. sofspra http://www.mediafire.com/file/y6kdxv65qub09rr/Malwae.Premium.3.4.4.2398.rar Link to comment Share on other sites More sharing options...
Betts1964 Posted March 30, 2018 Share Posted March 30, 2018 4 minutes ago, sofspra said: Ok, here is my link on Mediafire. This is the link for 3..4.4. and includes the crack. If this works for you, then you might be best to install 4.4.4 first. I just installed 3.4.5 a few minutes ago. It kept all settings and all and no question on activation so far. I have the crack in a separate folder but it is an extracted file so not sure if the crack is just one file or uses other files too. Let me know how you make out. sofspra http://www.mediafire.com/file/y6kdxv65qub09rr/Malwae.Premium.3.4.4.2398.rar Cant dowload this.... Link to comment Share on other sites More sharing options...
uffbros Posted March 30, 2018 Share Posted March 30, 2018 3.4.5.2467 Out Link to comment Share on other sites More sharing options...
sofspra Posted March 30, 2018 Share Posted March 30, 2018 33 minutes ago, bergy1964 said: Cant dowload this.... Ok, having a hellva time with Norton on this file. Here is a link to my Onedrive. It got there after I turned Norton off. Again, this should give the crack and the old edition sofspra https://1drv.ms/u/s!AlHKwLRMKkQEgZMq91gy9_K5225XsA Link to comment Share on other sites More sharing options...
Betts1964 Posted March 30, 2018 Share Posted March 30, 2018 how do i download this? when i click d/l it does nothing.... Link to comment Share on other sites More sharing options...
sofspra Posted March 30, 2018 Share Posted March 30, 2018 9 minutes ago, bergy1964 said: how do i download this? when i click d/l it does nothing.... Ok, I just clicked on the link right in my post. I hit Download on the Onedrive and it took a little time to load. It immediately said it contained a virus but I was still offered the download with warning. The file did get to my folder which is protected from my Norton. Perhaps give it a little time to load. sofspra Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.