Jump to content

Directory Opus 12.23.Build.7655-de! *Dec 23*


medp7060

Recommended Posts

Posted (edited)

Mirkec Repack Added.

 

Special note of the Mirkec repack:

1) Just ignore the two RefCount registry key value writing errors. These key values are not necessary.

2) Insert the de! 12.23 license (see post #1) or from the original post here at the first run.

 

Updated:

A single x86 and x64 de! repack installer is added in post #1:  "DOpusInstall_x86_x64_de!_repack v2.7z"

Edited by medp7060
Instruction added
Link to post
Share on other sites

Visible of Certificate/License file removed and moved to text host site. Reminder all Keys/Serial Number/License File should be hosted on a free text hosting site then properly share-coded. Please do not put it into spoilers.

Link to post
Share on other sites

I have installed the portable version 12.23x64 and the certificate is accepted, but I am asked to install a certificate every time I open it. I have been running Dopus v12.6 without a hitch for quite some time. Any help would be greatly appreciated. Thanks

Link to post
Share on other sites
On 1/12/2021 at 9:40 AM, pooch said:

I have installed the portable version 12.23x64 and the certificate is accepted, but I am asked to install a certificate every time I open it. I have been running Dopus v12.6 without a hitch for quite some time. Any help would be greatly appreciated. Thanks

I cannot reproduce what you experienced. The portable installer will install the certificate to a portable folder you have specified. After that, please make sure you start it by running the "DirectoryOpusPortable.exe" in the portable folder, not the portable installer.

Link to post
Share on other sites
On 1/12/2021 at 2:10 AM, pooch said:

I have installed the portable version 12.23x64 and the certificate is accepted, but I am asked to install a certificate every time I open it. I have been running Dopus v12.6 without a hitch for quite some time. Any help would be greatly appreciated. Thanks

You could try installing the portable with admin rights.

Link to post
Share on other sites
17 hours ago, pooch said:

Disabled it, still accepts certificate, I exit, restart and I am asked to install the certificate again. Thanks anyway.

First, please be noted by the portable installer:  This portable needs to install the certificate if you use it on a new computer.

"It appears that you are running on a new computer, please register again.
To register, copy the following and then select Install New Certificate, click on Paste and then Install."

 

Registration info is stored in this folder:

<Folder you specified>\Data\DirectoryOpus\CommonAppData

 

It has two files with one in the subfolder:

 

Global Data\globaldata.omd - Stores meta data about your Opus installation, including your registration code
dopus.cert - Your installed License Certificate

 

Have you checked if these files are written after the certificated is accepted? If not, you have a written permission issue.

 

Again, you are only asked to register once by running the portable installer. Hereafter, you start it by running "DirectoryOpusPortable.exe" in the portable folder <Folder you specified>

 

Data <folder>
App <folder>
DirectoryOpusPortable.ini
DirectoryOpusPortable.exe

 

Edited by medp7060
  • Like 2
Link to post
Share on other sites

<?xml version="1.0"?>
<opus_meta_data last_version_low="0" update_download_low="0" update_download_high="0" update_size="0" update_new_low="0" update_new_high="0" regcode=""/>

 <?xml version="1.0"?>
is what is in the Globaldata.omd folder after the certificate was accepted.

Thank you for your kindness is helping.

Link to post
Share on other sites

Also this in the folder dopus.cert :`‡©‘߈@ž`×cëÖ8¢©IŠÎhG¨€1j9ൔ  Ù!ówUKÓrKÑp„〠?•,Í›$Ô"ª+³âvÎz0¼gš]ÓvDCc !öu3ˆEÅEÚñÁˆ£á®zXÍšìU/ï[“øåÜ2_ì4Dò ú¨-P6ܳûã&DÏw¾^£¤îhÑ)=ÖŸh-&n¯²vÜttj‚Ëi;Q7í­–gÙgâ˜Y°/ðÜ〠Cð$6þ´ãböü |ÁÅ -aœ°•2Úñ-^W¤a3¯[email protected]ò>J™ìêÏÏþxÕè¼W;XRòÃÕ%™=´’[¢CËÿ¤ù„qÇOh\ò÷³|Òùãl´ÒÔ#ksÅUcƒ: ™-ÆÇsëÁ)‘·Ç©œmÅò:Ì〠<SÆ‹¿EB+i®y1ÖÖjB}‘ûV8¿TŒ£§UÚå7^}ôܶ¤¿T›Xy6¿¯ÄŽ³øäÈ0Úƒ‘LÀëV#wƒ,¶L´sÖ_†yEÓ'nÓj‰øSCŸÔ—¾¾+‡CãØjBÍ”€†s߈5}½"¶¸^!ˆ/Å2ž'h〠/·¡÷@ʼnyœ –KÓ=Bɸå«ã>ž¢d±!Ø1ÓFhŸI¢Ô‡TæãÌ    Îœ‘–)—mñ“¹`n4$üÃCØ¥PõÔ1mÈ­’ÒfVƒ'”§\7¾cHˆÄ”™wy¤Üæ,ãk5»®¦Lo±ßɆhï£(j¿«¨ã€ V›f ©®Ñ¥
Â¥-5YÒÝaí&k.=Õër2Ðz¦óI,b u‡:*1Y0MÓa›Ô×ÝE÷/}OÓ@…¨e7´ê=:øÁiSåĈ›DØ¥€ÏVj…MRb=Á; ³Éë°û…[¨:G[jé¬'{Ϋ{[Ū

Link to post
Share on other sites
4 hours ago, pooch said:

<?xml version="1.0"?>
<opus_meta_data last_version_low="0" update_download_low="0" update_download_high="0" update_size="0" update_new_low="0" update_new_high="0" regcode=""/>

 <?xml version="1.0"?>
is what is in the Globaldata.omd folder after the certificate was accepted.

If this is what you got in the Globaldata.omd, the registration was not successful. The regcode has to be shown in a format as "xxxxx-xxxxx-xxxx-xxxxx". The dopus.cert is coded so it shows garbage.

  • Like 2
Link to post
Share on other sites
1 hour ago, pooch said:

I give up. 12.6 works fine and it has the same regcode that I sent to you for 12.23.

I meant regcode format.

 

It is possible that you have leftovers from previous installations (however, which can be removed by the de!'s dopuscleaner). One way to check is to test it in Windows Sandbox. I tested the 12.23 x64 portable on three machines, and all worked. It only asked for a re-registration when a new running environment is detected by DO. Until a real portable is available, an alternative option is to export a portable version onto a USB flash drive from an installed version. The exported portable will be registered with the USB flash drive and can be used on any computer.

  • Like 2
  • Thanks 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...