Jump to content

Virtual Audio Cable 4.62


Recommended Posts

Virtual Audio Cable v4.62

 

EhwB7dM.png

 

 

Virtual Audio Cable software allows you to transfer audio (wave) streams between applications and/or devices.

It creates a set of virtual audio devices named "Virtual Cables", each of them consists of a pair of the waveform input/output endpoints. Any application can send (play back) audio stream to an output side of a cable, and any other application can receive (record) this stream from an input side. All transfers are made digitally, providing NO sound quality loss (a bitperfect streaming).

VAC behavior is similar to "Stereo Mix" ("What You Hear", "What U Hear", ) feature of some hardware audio adapters (cards). But it is only similar, not equivalent. If you simply need a function like "Stereo Mix" under Vista/Win7/Win8/Win10, there could be better to try to enable it in your audio adapter.

If more than one application are sending audio to Virtual Cable device, VAC mixes all streams together. If more than one application are receiving audio from Virtual Cable device, VAC distributes the same audio data among all targets.

VAC is useful to record application's audio output in real time (audio player, instant messenger or software synthesizer), or transfer a sound stream to another application processing it. You can, for example, use two or more software audio players/generators/synthesizers/sequencers to produce audio streams, sending them to Virtual Cablet device and record a mixed stream from the same Virtual Cable device, using any recording software - Windows Sound Recorder, Audacity, Sound Forge, WaveLab, Adobe Audition (formerly Cool Edit Pro), Gold Wave, Cakewalk/Sonar, Cubase/Nuendo etc.

With an ASIO wrapper like ASIO4ALL, you can use VAC with ASIO supporting applications.

If you use an audio encoder application that encodes a stream coming from a sound card, you can use VAC to supply such encoder with a stream produced by other application.

You can use VAC to capture an output sound stream from the application that doesn't allow to write it into WAV/MP3 file directly. Unlike Total Recorder allowing you to simply save audio stream, VAC allows to route it in real time.

VAC can be used with network audio/video broadcasting software like SAM Broadcaster.

If you are using some Voice Over IP (VoIP) and/or Internet Telephony applications like Skype, you can use VAC to record your calls and conversations.

VAC needs no hardware audio card; it is a "virtual audio card" itself.

A detailed description is included into a free trial package.

Since VAC 4 is an NT WDM driver, there are some benefits but some (generally older) applications that use MME (waveIn/waveOut) interface can work better with the older VAC 3 version. This version also supports Windows 98/ME.

If you need to simply share your In/Out wave ports among several applications under Windows 2000 and earlier Windows versions, take a look to the Wave Clone software.

Important notes

Please note that VAC is not a self-sufficient software that may work alone just under operating system control. VAC is a tool. Like hardware tools (for example, a screwdriver or a saw) that are used only together with other objects (screws or boards), VAC should be used only together with audio applications to route audio streams produced or consumed by these applications.

Features

  • Local (console) session only (does not work via Remote Desktop or Terminal Services).
  • Windows 5.x, 6.x and 10.x platforms (32-bit and 64-bit).
  • Up to 256 virtual cable devices (some systems limit number of MME devices).
  • 1..20 milliseconds per interrupt/event.
  • 1..100 pin instances.
  • Almost any of fixed point PCM audio formats (1000..384000 samples per second, 8..32 bits per sample, 1..8 channels). Floating point formats are not supported.
  • Almost no sound latency with maximal interrupt/event frequency.
  • RTAudio support with notification events, clock and position registers. Clock registers are bound to Virtual Cables so all streams in each cable are coherent.
  • Unlimited number of Kernel Streaming clients connected to each port.
  • Signal mixing (with saturation) between output port clients.
  • PCM format conversion (sampling rate, bits per sample, number of channels).
  • Volume control features (both attenuation and boost).
  • Channel scattering/gathering mode.
  • Watermark control technique to improve stream stability with unstable applications.
  • Stream buffering technique to partially compensate bad application buffering algorithms.
  • Control Panel application to configure cables and watch their state.
  • Audio Repeater application that transfers from any recording to any playback device.

System requirements

  • Win 5.1..10.x (Windows XP/2003/Vista/Server 2008/Win7/8/8.1/10) platforms, 32-bit or 64-bit.
  • Any hardware suitable for a host OS.
  • A native hardware or a fully virtualized environment (VMware Server/Workstation, VirtualBox, VirtualPC etc.). With partial virtualization (VPS, Virtuozzo etc.), only host OS installation is possible (see VAC user manual for details).
  • Hardware and OS must be suitable for real-time audio processing. You can check your system with LatencyMon and tune it using common guidelines.

 

 

 

Version 4.62 (03.01.20)

  • Fixed driver signature issues in Win7/8/8.1.
  • Fixed minor bugs in Setup application.

Version 4.61 (30.12.19)

  • Fixed Audio Repeater bug that caused hangup on device disconnection.
  • Added top speaker channel support.
  • Added signal processing mode support.
  • Replaced independent cable clock sources with a single kernel timer to allow multiple cables to be coherent.
  • Fixed a bug in calculation of minimal cable event period (Cable Info window).
  • Fixed a bug in WaveRT capture stream processing that caused data loss on short buffering time.
  • Increased cable clock calculation precision, eliminating error accumulation.
  • Increased clock register bitness up to 64 and precision up to QPC resolution.
  • Added workaround for audio device properties confusion due to permanent property caching in Win10.
  • Cumulative algorithm for actual sampling rate calculation.
  • Added Sound Settings and Microphone Privacy buttons to the Control Panel.
  • Added Microphone Privacy reminders to Audio Repeater and Control Panel.
  • Changed signal level indicators from linear to logarithmic for better visibility.
  • Added gauge coloring to Audio Repeater windows.
  • Added automatic uninstaller launching feature to the setup application.
  • Added default endpoint checking feature to the setup application.
  • In the setup application, using more reliable device uninstallation algorithm.
  • Clarified names of System Audio Engine and Audio Service.
  • Added feature-limited free version.
  • Removed three-cable limitation from trial version.

 

 

 

Homepage:

http://software.muzychenko.net/eng/vac.htm

 

 

Virtual Audio Cable v4.62

Site: https://www.solidfiles.com
Sharecode: /v/WGwPQmeZmQm5g

 

 

 

  • Like 2
  • Thanks 1
Link to post
Share on other sites
  • 6 months later...
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • xanax

    1

  • flash13

    1

Top Posters In This Topic

Popular Posts

Virtual Audio Cable v4.62       Virtual Audio Cable software allows you to transfer audio (wave) streams between applications and/or devices. It creates a set of virtual

@RecursiveRegistrations   Off Topic post removed. When a new update is released, please create a new topic for it. We keep previous topics for discussions, not for new updates to be posted i

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...